EB202-CP
Features & Benefits
Preliminary
• Supports E1.S, E3.S (2 types of EDSFF) and U.2 form factor as Open Bay design
• Supports 4th Gen AMD EPYC™ Processors (Codename “Genoa”)
• Short-depth design for space critical applications
• 3 PSU Options: single, redundant/single and DC input
• Supports up to 2 GPU cards
• Full drive removal with one lever
• Front-to-back airflow and hot swap reduandant fans to provide optimal thermal conditions
Key Features
• Supports E1.S, E3.S (2 types of EDSFF) and U.2 form factor as Open Bay design
• Supports 4th Gen AMD EPYC™ Processors (Codename “Genoa”)
• Short-depth design for space critical applications
• 3 PSU Options: single, redundant/single and DC input
• Supports up to 2 GPU cards
• Full drive removal with one lever
• Front-to-back airflow and hot swap reduandant fans to provide optimal thermal conditions
| Dimensions (W x D x H) | ||||
| • mm : 438 x 558.8 x 87.2 • inches : 17 x 22 x 3.4 |
||||
| Motherboard | ||||
| Code Name - Capella | ||||
| Processor | ||||
| Processor Support : 4th Gen AMD EPYC™ Processors (Codename “Genoa”) |
||||
| CPU Interconnection: AMD Genoa 320/280W Top | ||||
| Socket Type : SP5 | ||||
| Chipset Support | ||||
| AMD Zen4 Genoa EPYC | ||||
| System Memory | ||||
| • DDR5 4800 MHz • Total 8 memory slots |
||||
| Front Panel | ||||
| Power switch, Reset button, ID button, 2 x USB 2.0 | ||||
| LEDs | ||||
| Front panel: • Power status, HDD status, Lan LED, BMC Alert LED, ID LED SSD status: • Green light : running • Flashing green light : reading • Amber light : no function, customize • Blue light : no function, customize PSU: • Constant bright green light : system running • Red light : power has issue • Flashing green light : has power but system does not turned on |
||||
| Drive Bays | ||||
| External : Options: • E1.S 8-bay • E3.S 8-bay • U.2 4-bay |
||||
| Backplane | ||||
| • 1 x 8-port E1.S/E3.S backplane • 1 x 8-port U.2 backplane (option) |
||||
| Expansion Slots (PCIe 5.0) | ||||
| • 1 x PCIe Gen5 x16 slot + 1 x HD slot PCIe Gen5 x16 (rear) • 1 x OCP 3.0 Mezz. PCIe Gen5 x16 • 4 x MCIO (x16) support total 64 lanes PCIe Gen5 • 2 M.2 22110 PCIE Gen5 x4 |
||||
| System BIOS | ||||
| BIOS Type : AMI / SPI (Serial Peripheral Interface) FLASH interface |
||||
| BIOS Features : • ACPI • PXE • IPMI KCS interface • SMBIOS • Serial console redirection • SR-IOV • CXL • Secure Boot • TPM • PCIe Hotplug |
||||
| On-board Devices | ||||
| SATA : 2 x SATA3 7pin (support RAID 0/1) share with M.2 SATA3 |
||||
| IPMI : IPMI 2.0 compatible BMC with iKVM support / AST2600 (eSPI) |
||||
| Network Controllers : • Broadcom BCM5720 for BMC shared NIC management and Data transfer • Realtek RTL8211F GbE for BMC dedicate management port (NCSI shared NIC - reserved BCM5720) |
||||
| Graphics : 1920X1200 32bpp@60Hz |
||||
| Rear I/O | ||||
|
||||
| Power Supply | ||||
| 1200W 1+1, 12V single power-in 3 PSU options: • Training simulation - single PSU • Edge applications - redundant/single • Edge applications and vehicle - DC input |
||||
| System Cooling | ||||
| Low noise/low power fans, 4 x 6056 fans, supports fan redundancy, 2 x 4028 fans in back of EDSFF drive backplane | ||||
| System Management | ||||
| • Baseboard Management Controller • Intelligent Platform Interface 2.0 (IPMI 2.0) • iKVM, Media Redirection, IPMI over LAN, Serial over LAN • SMASH Support |
||||
| Environmental Specifications | ||||
| • Storage temperature : -10ºC(14ºF) ~ 60ºC(140ºF) • Operating temperature : 0ºC(32ºF) ~ 35ºC(95ºF) • Storage operating humidity : 5%~95% non-condensing |
* All specifications are subject to change without notice.