This drive carrier converts 1 x 5.25 drive bay to 1 x 3.5 hot swap bay, supporting SATA and SCSI interface.

BTO Reference Model

This drive enclosure converts 1 x 5.25 drive bay to 2 x 2.5 SFF G-tray hot swap bays, supporting SAS and SATA interface.

This drive enclosure converts 1 x 5.25 drive bay to 2 x 2.5 SFF H-tray hot swap bays, supporting SAS and SATA interface.

This drive enclosure converts 1 x 5.25 drive bay to 2 x 2.5 SFF hot swap bays, supporting 2 NVMe PCIe SSDs. The drive trays are tool-less. No tools are needed for installation and removing of drives.

This drive enclosure converts 2 x 5.25 drive bay to 3 x 3.5 hot swap bays, supporting SAS, SATA and SCSI interface.

XC-34D1 is designed to support four 3.5-inch SAS/SATA II drives in three ODD drive bay spaces on tower and rack-mount form factors.

BTO Reference Model

2U 12-Bay 6G JBOD is ideal for high-availability storage and high performance appliance. This 2U 12bay enclosure supports two 6G expander modules for redundancy and 12x 6G (backplane support) SAS/SATA hard disk bays. It’s the perfect appliance building-block for OEM/ODM and System Integrators.

BTO Reference Model

(SAS 6G Ready)
The 2U 24-bay Small Form Factor (SFF) 6G JBOD is ideal for high-availability storage and high performance appliance. This enclosure supports two 6G expander modules for redundancy and 24x 6G (backplane support) SAS/SATA hard disk bays. It’s the perfect appliance building-block for OEM/ODM and System Integrators.

BTO Reference Model

(SAS 6G Ready)
The 3U 16-bay 6G JBOD is ideal for high-availability storage and high performance appliance. This enclosure supports two 6G expander modules for redundancy and 16x 6G (backplane support) SAS/SATA hard disk bays. It’s the perfect appliance building-block for OEM/ODM and System Integrators.

BTO Reference Model

(SAS 6G Ready)
The 4U 24-bay 6G JBOD is ideal for high-availability storage and high performance appliance. This enclosure supports two 6G expander modules for redundancy and 24x 6G (backplane support) SAS/SATA hard disk bays. It’s the perfect appliance building-block for OEM/ODM and System Integrators.

BTO Reference Model

(Ultra Density)
XJ3000-4603 is ideal for high-availability storage and high performance appliance. This 4U SAS 6G JBOD with single expander board enclosure supports 60 x 3.5” SAS/SATA drives. It’s the perfect appliance building-block for OEM/ODM and System Integrators. Ideally designed for Broadcast Archive, Storage Archive, etc.

J2012-01-03X, a 2U 12-Bay SAS 12G JBOD, housing single/dual expander (field upgradable) modules, dual fans and redundant power supply in short-depth design provides full redundancy and high availability for critical, performance driven storage demand. The combination of LSI expander chip and AIC's own firmware is a guarantee of compatibility with most mainstream hard drives, HBAs and RAID controllers (SAS2/SAS3).

BTO Reference Model

J2024-01, a 2U 24 SFF Bay SAS 12G JBOD, housing single/dual expander modules, dual fans and redundant power supply in short-depth design provides full redundancy and high availability for critical, performance driven storage demand. The combination of LSI expander chip and AIC's own firmware is a guarantee of compatibility with most mainstream hard drives, HBAs and RAID controllers (SAS2/SAS3).

J2024-02-03X, a 2U 24 SFF Bay SAS 12G JBOD, housing single/dual expander modules, dual fans and redundant power supply in short-depth design provides full redundancy and high availability for critical, performance driven storage demand. The combination of LSI expander chip and AIC's own firmware is a guarantee of compatibility with most mainstream hard drives, HBAs and RAID controllers (SAS2/SAS3).

J3016-01-03X, a 3U 16-Bay SAS 12G JBOD, housing single/dual expander (field upgradable) modules, dual fans and redundant power supply in short-depth design provides full redundancy and high availability for critical, performance driven storage demand. The combination of LSI expander chip and AIC's own firmware is a guarantee of compatibility with most mainstream hard drives, HBAs and RAID controllers (SAS2/SAS3).

J4024-01-03X, a 4U 24-Bay SAS 12G JBOD, housing single/dual expander (field upgradable) modules, four fans and redundant power supply in short-depth design provides full redundancy and high availability for critical, performance driven storage demand. The combination of LSI expander chip and AIC's own firmware is a guarantee of compatibility with most mainstream hard drives, HBAs and RAID controllers (SAS2/SAS3).

BTO Reference Model

J4076-01, a 4U 76-Bay (60 x 3.5” and up to 16 x 2.5”) 12Gb/s SAS JBOD, ideal for high-availability storage and high performance appliance. This 4U 12Gb/s SAS JBOD enclosure with single or dual expanders supports 60 x 3.5” top-loading and up to 16 x 2.5” rear facing hot-swap drives. The J4076-01’s unique feature allows tiered storage architecture in a single unit taking advantage of the full potential of the SAS3 (12Gb/s).

(North America only)

J4024-02-03X, a 4U 24-Bay SAS 12G JBOD with optional interposer compatible trays, housing single/dual expander (field upgradable) modules, four fans and redundant power supply in short-depth design provides full redundancy and high availability for critical, performance driven storage demand. The combination of LSI expander chip and AIC's own firmware is a guarantee of compatibility with most mainstream hard drives, HBAs and RAID controllers (SAS2/SAS3). 
                

J4060-01-03X, a 4U 60-Bay 12Gb/s SAS JBOD, ideal for high-availability storage and high performance appliance. This 4U 12Gb/s SAS JBOD enclosure with single or dual expanders supports 60 x 3.5” hot swap drives. 

BTO Reference Model

The 2U 24-bay hot-swap Small Form Factor (SFF) 6G JBOD is ideal for high-availability storage and high performance appliance. This enclosure supports two 6G expander modules for redundancy and 24x 6G (backplane support) SAS/SATA hard disk bays. It’s the perfect appliance building-block for OEM/ODM and System Integrators.

BTO Reference Model

The 3U 16-bay 6G hot-swap JBOD is ideal for high-availability storage and high performance appliance. This enclosure supports two 6G expander modules for redundancy and 16x 6G (backplane support) SAS/SATA hard disk bays. It’s the perfect appliance building-block for OEM/ODM and System Integrators.

BTO Reference Model

The 4U 24-bay 6G hot-swap JBOD is ideal for high-availability storage and high performance appliance. This enclosure supports two 6G expander modules for redundancy and 24x 6G (backplane support) SAS/SATA hard disk bays. It’s the perfect appliance building-block for OEM/ODM and System Integrators.

BTO Reference Model

XJ3000-4603S is ideal for high-availability storage and high performance appliance. This 4U SAS 6G JBOD with dual expander board enclosure supports 60 x 3.5” top-loading hot-swappable drives. It’s the perfect appliance building-block for OEM/ODM and System Integrators.

BTO Reference Model

XJ3000-2123E, a 2U 12Bay SAS 6G JBOD from AIC's entry level series, includes one single expander board with LSI chip and AIC's own firmware to deliver high performance and scalability at an affordable cost. As all AIC's JBODs, XJ3000-2123E is short-depth and is compatible with most mainstream hard drives, HBAs and RAID controllers.

BTO Reference Model

XJ3000-3163E, a 3U 16Bay SAS 6G JBOD from AIC's entry level series, includes one single expander board with LSI chip and AIC's own firmware to deliver high performance and scalability at an affordable cost. As all AIC's JBODs, XJ3000-3163E is short-depth and is compatible with most mainstream hard drives, HBAs and RAID controllers.

BTO Reference Model

XJ3000-4243E, a 4U 24Bay SAS 6G JBOD from AIC's entry level series, includes one single expander board with LSI chip and AIC's own firmware to deliver high performance and scalability at an affordable cost. As all AIC's JBODs, XJ3000-4243E is short-depth and is compatible with most mainstream hard drives, HBAs and RAID controllers.

RMC-1E is an entry-level 1U appliance chassis with 15” depth for space-sensitive applications, such as Network & Security appliance, firewall, VPN, Telephony and military applications. Standard ATX size (9.6” x 12”) motherboard can be populated into this appliance chassis. RMC-1E is a cost-effective appliance chassis that provide lower TCO (total cost of ownership) to IT professionals for higher ROI.  (Motherboard is not included.)

BTO Reference Model

RMC-1L is designed for entry-level File Server or Web Server where basic storage configuration is needed. It is also an ideal solution for high performance computing using Dual Xeon or Opteron based server boards.  (Power supply is optional. Motherboard is not included.)

BTO Reference Model

RMC-1T is an ideal entry-level server platform supports Single P4 and SSI CEB Compliant Dual Xeon motherboard by adjusting the fan bar. Short depth makes it ideal for appliance application also.  (Power supply is optional. Motherboard is not included.)

RMC-2A chassis is designed specifically for Entry-level server, Computer Telephony and Appliance applications with 17” depth and excellent air flow. It supports a full range of single processor-based ATX size motherboards.  (Power supply is optional. Motherboard is not included.)

BTO Reference Model

RMC-2F chassis is designed with flexibility in mind. Four 5.25” bays allows user to install from DVD, CD, or different types of hot-swappable HDD canisters. A hot-swap redundant power supply is also supported for high availability. It is the ideal platform for entry-level File Server and Network Attached Storage applications.  (Power supply is optional. Motherboard is not included.)

Dual-Core Intel® Xeon® Processor-based Platform Tested Chassis List

BTO Reference Model

RMC-2H chassis is an ideal choice for entry-level File Server for small to medium size offices. This 2U system can support up to 9 x 3.5" HDD.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

RMC-2N chassis is designed with flexibility in mind. Four 5.25” bays allows user to install CDs, DVDs, 1x or 3x hot-swappable drive canisters. It is the ideal platform for Entry-level File Server and Network Attached Storage applications.  (Power supply is optional. Motherboard is not included.)

BTO Reference Model

RMC-2T chassis is an ideal choice for entry-level File Server for small to medium size offices. A PS/2 power supply provides price advantage over 2U size slim power supply.  (Power supply is optional. Motherboard is not included.)

BTO Reference Model

RMC-3A is designed with 17” depth to meet the requirements of Telecom, Military and Appliance Applications. Full length cards are still supported even at shortened depth.  (Power supply is optional. Motherboard is not included.)

BTO Reference Model

RMC-3F is designed for entry-level applications where space is a concern, yet riser card or low-profile PCI requirements of 2U are not desirable. Up to 12” x 13” Extended ATX or SSI EEB 3.5 compliant motherboards are supported in this chassis.  (Power supply is optional. Motherboard is not included.)

RMC-3N is designed for entry-level applications where space is a concern, yet riser card or low-profile PCI requirements of 2U are not desirable. Up to 12” x 10.5” ATX or SSI CEB 1.01 compliant motherboards are supported in this chassis.  (Power supply is optional. Motherboard is not included.)

BTO Reference Model

RMC-4A is designed with 17.7” depth to meet the requirements of Telecom, Military and Appliance Applications. Full length cards are still supported even at shortened depth.  (Power supply is optional. Motherboard is not included.)

RMC-4S is the most basic rack-mount chassis which shows the most resemblance to a desktop computer chassis. It is designed to fit all standard desktop components yet its depth is kept within 20”. Many patented designs make this chassis the best choice in its class.  (Power supply is optional. Motherboard is not included.)

This drive enclosure converts 1 x 5.25 drive bay to 2 x 2.5 hot swap bays, supporting SAS and SATA interface.

BTO Reference Model

As the manager or operator of a data center, it is important to maintain tight control over costs while providing the maximum uptime for your customers. For that reason, AIC has developed the RSC-1C, a 1U 12-Bay storage server chassis. It enables data center services companies that run object storage applications a more efficient and economical solution. If you run Ceph, the RSC-1C is designed to provide abundant storage space and support for computing power to meet shifting application requirements. The tool-less design makes installation and maintenance quick and easy. Rubbers on the drive tray and silicon gaskets protect against vibrations. Its high-density, space-saving design saves you money. Its drives can be hot swapped at a moment’s notice, resulting in less downtime.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

As the manager or operator of a data center, it is important to maintain tight control over costs while providing the maximum uptime for your customers. For that reason, AIC has developed the RSC-1R, a 1U 8-Bay storage server chassis. It enables data center services companies that run object storage applications a more efficient and economical solution. If you run Hadoop, the RSC-1R is designed to provide dynamic amounts of computing power and storage space to meet shifting application requirements. The tool-less design makes installation and maintenance quick and easy. Rubbers on the drive tray and silicon gaskets protect against vibrations. Its high-density, space-saving design saves you money. Its drives can be hot swapped at a moment’s notice, resulting in less downtime.  (Power supply is included. Motherboard is not included.)

RSC-2ET is a T series 2U 12-bay SAS/SATA storage server chassis. With its tool-less 3.5" and 2.5" hard drive carriers, top covers and backplane, the RSC-2ET supports quick installation and easy maintenance. This tool-less design solution also features 3 x low-power consumption hot swap fans and SPGC pre-plated steel with minimal paint, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

RSC-3ET is a T series 3U 16-bay SAS/SATA storage server chassis. With its tool-less 3.5" and 2.5" hard drive carriers, top covers and backplane, the RSC-3ET supports quick installation and easy maintenance. This tool-less design solution also features 3 x low-power consumption hot swap fans and SPGC pre-plated steel with minimal paint, offering a cost-effective solution ideally suited for a broad range of applications. (Power supply is included. Motherboard is not included.) 

RSC-4BT is a T series 4U 36-bay SAS/SATA storage server chassis. With its tool-less 3.5" and 2.5" hard drive carriers, top covers and backplane, the RSC-4BT supports quick installation and easy maintenance. This tool-less design solution also features 6 x low-power consumption hot swap fans and SPGC pre-plated steel with minimal paint, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

RSC-4ET is a T series 4U 24-bay SAS/SATA storage server chassis. With its tool-less 3.5" and 2.5" hard drive carriers, top covers and backplane, the RSC-4ET supports quick installation and easy maintenance. This tool-less design solution also features 3 x hot swap fans designed to minimize rotational vibration and SPGC pre-plated steel with minimal paint, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

As the manager or operator of a data center, it is important to maintain tight control over costs while providing the maximum uptime for your customers. For that reason, AIC has developed the RSC-1.5M, a 1.5U 16-Bay storage server chassis. It enables data center services companies that run object storage applications a more efficient and economical solution. If you run Hadoop or Ceph, the RSC-1.5M is designed to provide dynamic amounts of computing power and abundant storage space at the same time to meet shifting application requirements. The tool-less design makes installation and maintenance quick and easy. Rubbers on the drive tray and silicon gaskets protect against vibrations. Its high-density, space-saving design saves you money. Its drives can be hot swapped at a moment’s notice, resulting in less downtime. Even though RSC-1.5M was initially designed for data centers, the aforementioned features make it a good solution for media production as well.  (Power supply is included. Motherboard is not included.)

As the manager or operator of a data center, it is important to maintain tight control over costs while providing the maximum uptime for your customers. For that reason, AIC has developed the RSC-3M, a 3U 32-Bay storage server chassis. It enables data center services companies that run object storage applications a more efficient and economical solution. If you run Hadoop or Ceph, the RSC-3M is designed to provide dynamic amounts of computing power and abundant storage space at the same time to meet shifting application requirements. The tool-less design makes installation and maintenance quick and easy. Rubbers on the drive tray and silicon gaskets protect against vibrations. Its high-density, space-saving design saves you money. Its drives can be hot swapped at a moment’s notice, resulting in less downtime. Even though RSC-3M was initially designed for data centers, the aforementioned features make it a good solution for media production as well. (Power supply is included. Motherboard is not included.)

RSC-4H is a 4U 60-Bay high density storage server chassis with tool-less design features. Unlike typical 4U server chassis which accommodate 24 or 36 drives, RSC-4H supports 60 top-loading 3.5” drive trays to save rack space and lower power consumption. It is suitable for cold storage which requires the capacity for vast amount of data but allows slower data retrieval and response time. Some suitable applications include media storage, medical imaging, email archiving, public or private cloud storage and data warehousing. Tool-less features on drive trays, top cover and backplane sliding mechanism make assembly and maintenance quick and easy.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

RSC-1AH is a H-series 1U 10-bay SAS/SATA storage server chassis. This environmentally friendly solution features high-efficiency power supply, SPGC pre-plated steel with minimal paint, tool-less mounting rail, and 5x easy-swap middle fans, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

RSC-1DH is a H-series 1U 4-bay SAS/SATA storage server chassis. This environmentally friendly solution features high-efficiency power supply, SPGC pre-plated steel with minimal paint, tool-less ball-bearing mounting rail, and easy-swap PWM fans, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

RSC-1JH is a H-series 1U 4, 6 or 8-bay SAS/SATA storage server chassis. This environmentally friendly solution features high-efficiency power supply, SPGC pre-plated steel with minimal paint, tool-less mounting rail, and 5x easy-swap middle fans, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

RSC-2AH is a H-series 2U 24-bay SAS/SATA storage server chassis. This environmentally friendly solution features high-efficiency power supply, SPGC pre-plated steel with minimal paint, tool-less mounting rail, and 3x easy-swap middle fans, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

RSC-2EH is a H-series 2U 12-bay SAS/SATA storage server chassis, with rear hot-swappable OS drive option. This environmentally friendly solution features high-efficiency power supply, 3x easy-swap middle fans, SPGC pre-plated steel with minimal paint, and tool-less ball-bearing mounting rail, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

RSC-2KH is a H-series 2U 8-bay SAS/SATA storage server chassis. This environmentally friendly solution features high-efficiency power supply, SPGC pre-plated steel with minimal paint, and tool-less ball-bearing mounting rail, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

RSC-3EH is a H-series 3U 16-bay SAS/SATA storage server chassis, with rear hot-swappable OS drive option. This environmentally friendly solution features high-efficiency power supply, 3x easy-swap middle fans, SPGC pre-plated steel with minimal paint, tool-less ball-bearing mounting rail, and hot-swappable rear OS drives option, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

RSC-4BH is a H-series 4U 36-bay SAS/SATA storage server chassis. This environmentally friendly solution features high-efficiency power supply, 6x middle fans, SPGC pre-plated steel with minimal paint, and ball-bearing mounting rail, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

RSC-4EH is a H-series 4U 24-bay SAS/SATA storage server chassis, with rear hot-swappable OS drive support. This environmentally friendly solution features high-efficiency power supply, 3x easy-swap middle fans, SPGC pre-plated steel with minimal paint, and ball-bearing mounting rail, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

RSC-5BH is a H-series 5U SAS/SATA storage server chassis. It supports 24 x 3.5" bays and 8 (+ optional 2) x 2.5" bays. This environmentally friendly solution features high-efficiency power supply, 3x easy-swap middle fans, SPGC pre-plated steel with minimal paint, and ball-bearing mounting rail, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

By implementing the next generation 14nm Intel® Xeon® processor E3-1200 v5 and v6 series, fully integrated microarchitecture with AIC-patented MAX I/O® technology, the Antlia server board provides for maximum flexibility of I/O usage, never before available in the industry.

The Antlia features benefits of the Skylake processor and next generation architecture with available Gen3 PCI Express and more memory support. Built upon the MAX I/O® technology, the Antlia series allows users to maximize the input/output (I/O) usage by utilizing the PCI Express directly at the source and eliminating the need for expensive switches. Users can cost-effectively manage PCI Express with the available bandwidth by choosing one of many riser cards for their I/O expansion requirement. Max I/O® supports any brand of PCI-based HBAs and that puts the decision of how to use PCI Express in the hands of the user, not in the hands of the board supplier.

The unique RTX form factor utilizes full internal chassis height for optimum I/Oconfigurations.

BTO Reference Model

The Aquila series server board features the same revolutionary, patent-pending MAX I/O(TM) technology as the Aries motherboard, allowing for maximum flexibility of I/O usage, never before available in the industry, and is also footprint compatible with Aries.

BTO Reference Model

The Ara series server board offers compelling performance and improved power efficiency, which is optimized for performance platforms (storage, security and communications infrastructure).

BTO Reference Model

The Castor series server board offers compelling performance and improved power efficiency, optimized for efficient performance platforms (storage, security and communications infrastructure).

BTO Reference Model

The Gemini series server board offers compelling performance and improved power efficiency, optimized for efficient performance platforms (storage, security and communications infrastructure).

BTO Reference Model

The Hadar series server board provides dual processor support, 3 channels of DDR3 1600 per socket and is capable of supporting an endless combination of PCIe Gen3 slots totaling 40 lanes.

BTO Reference Model

The Libra series server board, standard EATX form factor, offers compelling performance and improved power efficiency, which is optimized for efficient
performance platforms (storage, security and communications infrastructure).

By implementing Intel® Xeon® Processor E5-2600 v3 and v4 product family, fully integrated microarchitecture, the Libra series server board delivers unmatched performance, providing 2S support with four channels of DDR4 2400/2133MHz per socket, dual 10GBase-T, and optional Broadcom SAS 3008 IOC onboard.

Featured with ground breaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (including AVX 2.0), Energy Efficient Turbo,
Increased Intel® QPI link speeds up to 9.6GT/s and DDR4 memory, the Libra series server board enables next generation server solutions with an incredible
leap in performance in a standard EATX form factor platform.

BTO Reference Model

The Phoenix series server board offers compelling performance and improved power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure).

By implementing Intel® Xeon® Processor E5-2600 v3 and v4 product family, fully integrated microarchitecture with AIC-patented MAX I/O® technology and QuickPath extension (QPX), Phoenix series server board delivers unmatched performance, providing 2S support with four channels of DDR4 2400/2133MHz per socket; and unparalleled capability to further maximize all available I/O bandwidth, pushing the boundaries of Gen3 PCI Express.

Featured with ground breaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (including AVX 2.0), Energy Efficient Turbo, Increased Intel® QPI link speeds up to 9.6GT/s and DDR4 memory , the Phoenix series server board enables next generation server solutions with an incredible leap in performance.

BTO Reference Model

The Tolimon series server board offers compelling performance and improved power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure).

BTO Reference Model

1U Octans Compute Node Bare-bone supports AMD® 4100 series processors. CB117-OT harnesses MAX I/O™ technology, maximizing the usage of 1 OTS (off-the-shelf) PCIe card in the barebone.

BTO Reference Model

2U Octans Compute Node Bare-bone supports AMD® 4100 series processors. CB214-OT harnesses MAX I/O™ technology, maximizing the usage of 2 OTS (off-the-shelf) PCIe X16 cards in the barebone.

BTO Reference Model

The Octans series server board offers compelling performance and improved power efficiency, optimized for efficient performance platforms (storage, security and communications infrastructure).

BTO Reference Model

The Orion2 series Application Controller Board is a fully Storage Bridge Bay (SBB) 2.0 compliant blade design based on the advanced Intel® Picket Post hardware platform. It follows the SBB 2.0 specifications on providing multiple high-speed board-to-board communication paths allowing users to design a high-availability unified storage system.

BTO Reference Model

The Perseus series motherboard is a Storage Bridge Bay (SBB) 2.0 compliant blade design based on the advanced Intel Cranberry Lake hardware platform. It is the first hot-pluggable motherboard design ever following an industry standard, and offering board-to-board communication path allowing users to design an all-in-one high-availability system.

BTO Reference Model

CETUS Console Appliance Platform with PSG-M-CAUP945GC-210 (Capricorn) motherboard and integrated Intel® Atom™ processor 330.

BTO Reference Model

CETUS Console Appliance Platform with Intel® D945GCLF2 (Little Falls 2) motherboard and integrated Intel® Atom™ processor 330.

BTO Reference Model

1U 4-bay Dual DP Compute Node Bare-bone with redundant power supply, supports Dual/Quad Core processors. PSG-CB-1URCTDP0110 doubles the performance density and lowers the total cost of ownership (TCO).

BTO Reference Model

CETUS Console Appliance Platform with Biostar I945GC-I7 motherboard and supports single Intel® PLGA 775 socket processor.

BTO Reference Model

3U 8-bay General Purpose Server Bare-bone with hot-swap rear redundant power supply, supports Dual Intel® Nehalem processors. PSG-GB-3URGEDP0511 harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the bare-bone.

BTO Reference Model

3U 10 x 2.5-inch bays General Purpose Server Bare-bone with hot-swap rear redundant power supply, supports Dual Intel® Nehalem processors. PSG-GB-3URGEDP0611 harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the bare-bone.

BTO Reference Model

4U 6-bay Rackmount and Tower convertible supports Dual/Quad Core processors. PSG-GB-4URGEDP0111 supports up to 7 OTS (off-the-shelf) cards with support for 4 PCIe graphics cards @ double-slot spacing.

BTO Reference Model

3U 16-bay Storage Server Bare-bone with hot-swap rear redundant power supplies, supports Dual Intel® Nehalem processors. PSG-SB-3URGEDP0111 harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the bare-bone.

BTO Reference Model

3U 16-bay Storage Server Bare-bone with hot-swap rear redundant power supplies, supports Dual Intel® Nehalem processors. PSG-SB-3URGEDP0211 harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the bare-bone.

BTO Reference Model

1U 20-bay DP Storage Server Bare-bone with redundant power supply, supports Dual/Quad Core processors. SB112-CT harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the bare-bone.

Legacy Product

SB302-AQ, a 3U 16bay Storage Server Barebone, supports Dual-Core/Quad-Core processors. SB302-AQ has 16 x 3.5” (Front) + 2 x 2.5” (Rear OS) size HDD bays flexible storage applications. SB302-AQ harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf (up to 5) expansion cards in the barebone.

BTO Reference Model

TB109-AR, a 1U Telco Appliance Barebone, supports Dual-Core/Quad-Core processors. TB109-AR has 2 x 2.5” (Internal) or 1 x 3.5” (Internal) size HDD bays flexible storage applications. TB109-AR harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf (up to 2) expansion cards in the barebone.

BTO Reference Model

1U Aquila NEBS/Telco Ready Server with 3 x easy-swap fans and redundant power supply, supports Quad Core processor. TB116-AL harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the bare-bone.

BTO Reference Model

GB101-HA, a 1U 4bay General Purpose Barebone, supports 2 x Intel® Xeon® processor E5-2400 series with 5+ years life cycle. GB101-HA has 4 x 3.5” size hot-swap hard drive bays . GB101-HA harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the barebone.

BTO Reference Model

GB109-CT, a 1U 4bay General Purpose Barebone, supports Dual-Core/Quad-Core/6-Core processors. GB109-CT has 4 x 3.5” size HDD bays w/o expander to maximize I/O bandwidth. GB109-CT harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf (up to 3) expansion cards in the barebone.

BTO Reference Model

GB207A-CT, a 2U 12bay General Purpose Barebone, supports Dual-Core/Quad-Core/6-Core processors. GB207A-CT has 12 x 3.5” (Front) + 2 x 2.5” (Rear OS) size HDD bays w/o expander to maximize I/O bandwidth. GB207A-CT harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf (up to 5) expansion cards in the barebone.

BTO Reference Model

GB304A-GE, a 3U General Purpose Barebone, supports Dual-Core/Quad-Core/6-Core processors. GB304-GE has 3 x 3.5” + 2 x 2.5” size HDD bays for flexible storage applications. GB304-GE harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf (up to 10) expansion cards in the barebone.

HA201-WP, a 2U High-availability, Cluster-in-a-Box, Storage Server Solution that leverages the SBB (Storage Bridge Bay) standard with the use of COTS components. The dual node configuration comes with two Intel® Server Boards (S2600WP), each node supports dual Intel® Xeon® Processor E5-2600/E5-2600 v2 series processors. The HA201-WP is an active-active solution, which features fully redundant, hot-swappable compute nodes, PCIe NTB or 10GbE connection between nodes for communication and fail-over, 24x 3.5” hot-swappable HDD bays and 5x PCIe Gen3 slots per node.

HA401-CP2, a 4U High-availability Storage Server Solution that leverages SBB (Storage Bridge Bay) standards with the use of COTS components. It comes with Intel® Server Board which supports Intel® Xeon® processor E5-2600/E5-2600 v2 product family. It has fully redundant, hot-swappable controller canisters, 10GbE interconnection between controllers for fail-over, 24 x 3.5” hot swap drive bays and 6 x PCIe Gen3 slots per controller.

BTO Reference Model

HA201-TP is a 2U 24-SFF-Bay Cluster-in-a-box solution that provides high-availability in an active-active configuration. It comes with two Intel® S2600TP Server Boards (one board per node), each supporting dual Intel® Xeon® processors in the E5-2600 v3 and v4 product family. Both nodes process I/Os and provide simultaneous and balanced access to the logical devices, which increases overall cluster performance significantly. When failover occurs, the secondary node automatically takes over the devices, client connections, and all processes/services of the system. It provides protection from loss of revenue when access to data resources and critical business applications are disrupted. The HA201-TP eliminates SPOFs (single point of failures). Its support on SSDs allows faster access to data. It is optimized for mission-critical, enterprise-level storage applications.

BTO Reference Model

HA401-LB is a 4U 24-Bay Cluster-in-a-box solution that provides high-availability in an active-active configuration and supports 12Gbs SAS. It comes with two AIC Server Boards (one board per node), each supporting dual Intel® Xeon® processors in the E5-2600 v3 and v4 product family. Both nodes process I/Os and provide simultaneous and balanced access to the logical devices, which increases overall cluster performance significantly. When failover occurs, the secondary node automatically takes over the devices, client connections, and all processes/services of the system. It provides protection from loss of revenue when access to data resources and critical business applications are disrupted. The HA401-LB eliminates SPOFs (single point of failures). It is optimized for mission-critical, enterprise-level storage applications.

SB110-CT, a 1U 10bay SFF Storage Server Barebone, supports Dual-Core/Quad-Core/6-Core processors. SB110-CT has 10 x 2.5” (front) + 2 x 1.8” (internal) size HDD bays w/o expander to maximize I/O bandwidth for SSD (solid state drives). SB110-CT harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf (up to 5) expansion cards in the barebone.

SB221-GE, a 2U 24bay SFF Storage Server Barebone, supports Dual-Core/Quad-Core/6-Core processors. SB221-GE has 24 x 2.5" (front) + 2 x 1.8” (internal) size HDD bays w/o expander to maximize I/O bandwidth for SSD (solid state drives). SB221-GE harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf (up to 9) expansion cards in the barebone.

SB303-GE, a 3U 16bay Storage Server Barebone, supports Dual-Core/Quad-Core processors. It has 16 x 3.5” (Front) + 2 x 2.5” (Rear OS) size HDD bays flexible storage applications. SB303-GE harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf (up to 10) expansion cards in the barebone.

SB121-TO, a 1U 10-Bay SFF Storage Server Solution, supports dual Intel® Xeon® processor E5-2600/E5-2600 v2 Product Family. SB121-TO has 10 x 2.5” (Front) hard drive bays w/o expander to maximize I/O bandwidth for SSD (solid state drives). SB121-TO harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the barebone.

SB122-TO, a 1U 10-Bay SFF Storage Server Solution, supports dual Intel® Xeon® processor E5-2600/E5-2600 v2 Product Family. SB122-TO has 8 x 2.5” PCIe SSD (front) + 2 x 2.5” (front) hard drive bays to provide a highly dense, hybrid storage solution. SB122-TO harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the barebone.

SB201-TO, a 2U 24-Bay SFF Storage Server Barebone, supports dual Intel® Xeon® processors E5-2600 v2 series. It has 24 x 2.5” (front) + 2 x 2.5” (rear) size HDD bays. SB201-TO harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf (up to 8) expansion cards in the barebone.

SB301-TO, a 3U 16bay Storage Server Barebone, supports dual Intel® 2S Xeon® processors E5-2600 series. It has 16 x 3.5” (front) + 2 x 2.5” (rear) size HDD bays. SB301-TO harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf (up to 10) expansion cards in the barebone. Customizable for various applications: Cloud Storage Server, Broadcast Server, etc.

SB302-CP2, a 3U Storage Server Barebone with Intel® Server Board, supports Intel® Xeon® processor E5-2600/E5-2600 v2 product family. It has 16 x 3.5” (front) + 2 x 2.5” (rear) size HDD bays and 6 x PCIe Gen3 slots.

SB401-CP2, a 4U Storage Server Barebone with Intel® Server Board, supports Intel® Xeon® processor E5-2600/E5-2600 v2 product family. It has 24 x 3.5” (front) + 2 x 2.5” (rear) size HDD bays and 6 x PCIe Gen3 slots.

SB402-CP2, a 4U Storage Server Barebone with Intel® Server Board, supports Intel® Xeon® processor E5-2600/E5-2600 v2 product family. It has 36 x 3.5” HDD bays and 6 x PCIe Gen3 slots.

SB509-CP2, a 5U Storage Server Barebone with Intel® Server Board, supports dual Intel® Xeon® Processors E5-2600/E5-2600 v2 Product Family. It has 90 x 3.5” hot swap and 2 x 2.5" internal drive bays.

BTO Reference Model

SB121-PH, a 1U 10-Bay SFF Storage Server Solution, supports dual Intel® Xeon® processors E5-2600 v3 and v4 product family. SB121-PH has 10 x 2.5” (front) hard drive bays to provide high storage density. SB121-PH harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the barebone.

BTO Reference Model

SB122A-PH, a 1U 10-Bay SFF Storage Server Solution, supports dual Intel® Xeon® processors E5-2600 v3 and v4 product family. SB122A-PH has 10 x 2.5” PCIe SSD hard drive bays to provide a highly dense, hybrid storage solution. SB122A-PH harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the barebone.

BTO Reference Model

SB122-PH, a 1U 10-Bay SFF Storage Server Solution, supports dual Intel® Xeon® processors E5-2600 v3 and v4 product family. SB122-PH has 8 x 2.5” PCIe SSD (front) + 2 x 2.5” (front) hard drive bays to provide a highly dense, hybrid storage solution. SB122-PH harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the barebone.

BTO Reference Model

SB151-LB, a 1U 16-Bay Object Storage Server, supports dual Intel® Xeon® Processors E5-2600 v3 and v4 product family. It has 16 x 3.5” hot swap and 2 x 2.5” internal drive bays. SB151-LB supports up to 6 PCIe 3.0 slots utilizing 64 lanes

BTO Reference Model

SB201-LB, a 2U 24-Bay Storage Server Solution, supports dual Intel® Xeon® Processors E5-2600 v3 and v4 product family. It has 24 x 2.5” (front) and 2 x 2.5” (rear) hot swap drive bays. SB201-LB supports up to 6 PCIe 3.0 slots utilizing 64 lanes.

BTO Reference Model

SB212-PH, a 2U 12-Bay Storage Server Solution, supports dual Intel® Xeon® Processors E5-2600 v3 and v4 product family. It has 12 x 3.5” and 2 x 2.5” hot swap drive bays. SB212-PH harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the barebone.

BTO Reference Model

SB302-LB, a 3U 16-Bay Storage Server Solution, supports dual Intel® Xeon® Processors E5-2600 v3 and v4 Product Family. It has 16 x 3.5” and 2 x 2.5” hot swap drive bays. SB302-LB supports up to 6 PCIe 3.0 slots utilizing 64 lanes.

BTO Reference Model

SB303-LB, a 3U 32-Bay Object Storage Server, supports dual Intel® Xeon® Processors E5-2600 v3 and v4 product family. It has 32 x 3.5” hot swap and 2 x 2.5” internal drive bays. SB303-LB supports up to 6 PCIe 3.0 slots utilizing 64 lanes.

BTO Reference Model

SB401-LB, a 4U 24-Bay Storage Server Solution, supports dual Intel® Xeon® Processors E5-2600 v3 and v4 product family. It has 24 x 3.5” hot swap internal drive bays. SB401-LB supports up to 6 PCIe 3.0 slots utilizing 64 lanes.

BTO Reference Model

TB101-HA, a NEBS/Telco Appliance Barebone, supports 2 x Intel® Xeon® processors E5-2400 and 12 DIMM with 5+ year life cycle. TB101-HA has 2 x 2.5” SFF hot-swap hard drive bays. TB101-HA harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards (up to 2) in the barebone.

BTO Reference Model

1U Castor NEBS/Telco Ready Server with four hot-swap fans and redundant power supply, supports Dual/Quad Core processors. TB110N-CT harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the bare-bone.

BTO Reference Model

TB116-AA, a NEBS/Telco Appliance Solution, supports one Intel® Xeon® Processor E3-1200 v3 Product Family, 4th Generation Intel® Core™ i3 Processor, or Intel® Pentium® or Celeron® Processor and 4 DIMM with 5+ year life cycle. TB116-HA harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards (up to 2) in the barebone.

BTO Reference Model

TB216-AA, a NEBS/Telco Appliance Solution, supports one Intel® Xeon® Processor E3-1200 v3 Product Family, 4th Generation Intel® Core™ i3 Processor, or Intel® Pentium® or Celeron® Processor and 4 DIMM with 5+ year life cycle. TB216-AA harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards (up to 4) in the barebone.

BTO Reference Model

TB101-HA, a NEBS/Telco Appliance Barebone, supports 2 x Intel® Xeon® processors E5-2400 and 12 DIMM with 5+ year life cycle. TB101-HA has 2 x 2.5” SFF hot-swap hard drive bays. TB101-HA harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards (up to 2) in the barebone.

BTO Reference Model

TB116-AA, a NEBS/Telco Appliance Solution, supports one Intel® Xeon® Processor E3-1200 v3 Product Family, 4th Generation Intel® Core™ i3 Processor, or Intel® Pentium® or Celeron® Processor and 4 DIMM with 5+ year life cycle. TB116-HA harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards (up to 2) in the barebone.

BTO Reference Model

TB216-AA, a NEBS/Telco Appliance Solution, supports one Intel® Xeon® Processor E3-1200 v3 Product Family, 4th Generation Intel® Core™ i3 Processor, or Intel® Pentium® or Celeron® Processor and 4 DIMM with 5+ year life cycle. TB216-AA harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards (up to 4) in the barebone.

BTO Reference Model

RSC-3EH is a H-series 3U 16-bay SAS/SATA storage server chassis, with rear hot-swappable OS drive option. This environmentally friendly solution features high-efficiency power supply, 3x easy-swap middle fans, SPGC pre-plated steel with minimal paint, tool-less ball-bearing mounting rail, and hot-swappable rear OS drives option, offering a cost-effective solution ideally suited for a broad range of applications.

BTO Reference Model

HA401-CP2, a 4U High-availability Storage Server Solution that leverages SBB (Storage Bridge Bay) standards with the use of COTS components. It comes with Intel® Server Board which supports Intel® Xeon® processor E5-2600/E5-2600 v2 product family. It has fully redundant, hot-swappable controller canisters, 10GbE interconnection between controllers for fail-over, 24 x 3.5” hot swap drive bays and 6 x PCIe Gen3 slots per controller.

BTO Reference Model

HA201-TP is a 2U 24-SFF-Bay Cluster-in-a-box solution that provides high-availability in an active-active configuration. It comes with two Intel® S2600TP Server Boards (one board per node), each supporting dual Intel® Xeon® processors in the E5-2600 v3 family. Both nodes process I/Os and provide simultaneous and balanced access to the logical devices, which increases overall cluster performance significantly. When failover occurs, the secondary node automatically takes over the devices, client connections, and all processes/services of the system. It provides protection from loss of revenue when access to data resources and critical business applications are disrupted. The HA201-TP eliminates SPOFs (single point of failures). Its support on SSDs allows faster access to data. It is optimized for mission-critical, enterprise-level storage applications.

BTO Reference Model

Cloud computing has definitely brought convenience to our lives as users but not necessarily to those who manage data centers. Data center management requires speed and agility. To respond to the demands from data centers, AIC introduces the Smart Rack Solution.

BTO Reference Model

1D-HV24-03 is a 1U dual-node compute blade. It comes with two AIC server boards, each supporting dual Intel® Xeon® processor E5- 2600/E5-2600 v2 product family. It is engineered to expedite high performance computing workloads.

BTO Reference Model

21D-B312-04 is a 1U dual-node compute blade. It comes with two AIC server boards, each supporting dual Intel® Xeon® processor E5- 2600 v3 and next generation Product Family. It is engineered to expedite high performance computing workloads.

BTO Reference Model

1S-HV26-08 is a 1U single-node storage blade. It is equipped with one AIC server board and 8 3.5” drives. The server board supports dual Intel® Xeon® processor E5- 2600/E5-2600 v2 product family. It serves as a computing node and provides storage capability at the same time. The drive trays are screw-less. This makes service and upgrade easy and fast.

BTO Reference Model

21S-B312-08 is a 1U single-node storage blade. It is equipped with an AIC server board and 8 3.5” drives. The server board supports dual Intel® Xeon® processor E5-2600 v3 and next generation Product Family. It serves as a computing node and provides storage capability at the same time. The drive trays are screw-less. This makes service and upgrade easy and fast.

BTO Reference Model

The J230-21R is a 2U 30-Bay high density JBOD node that enables easy expansion of storage. It is consisted of two drive drawers to support a total of 30 drive bays. The drive drawers are designed with sliding and locking mechanism. The hot-swap drive bays are tool-less. With these features, service and upgrade become easy.

RSC-2AT is a T series 2U 24-bay SAS/SATA storage server chassis. With its tool-less 2.5" hard drive/SSD carriers, top covers and backplane, the RSC-2AT supports quick installation and easy maintenance. This tool-less design solution also features 3 x low-power consumption hot swap fans and SPGC pre-plated steel with minimal paint, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

RSC-2ETS is a T series 2U 12-bay SAS/SATA storage server chassis. With its tool-less 3.5" and 2.5" hard drive carriers, top covers and backplane, the RSC-2ETS supports quick installation and easy maintenance. This tool-less design solution also features 3 x low-power consumption hot swap fans and shorter depth dimension, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

RSC-3ETS is a T series 3U 16-bay SAS/SATA storage server chassis. With its tool-less 3.5" and 2.5" hard drive carriers, top covers and backplane, the RSC-3ETS supports quick installation and easy maintenance. This tool-less design solution also features 3 x low-power consumption hot swap fans and shorter depth dimension, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

RSC-4ETS is a T series 4U 24-bay SAS/SATA storage server chassis. With its tool-less 3.5" and 2.5" hard drive carriers, top covers and backplane, the RSC-4ETS supports quick installation and easy maintenance. This tool-less design solution also features 3 x hot swap fans designed to minimize rotational vibration and shorter depth dimension, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

SB202-LB, a 2U 12-bay storage server solution, supports dual Intel® Xeon® Processors E5-2600 v3 and v4 product family. The backplane is tool-less and is of 12Gb/s SAS. You can opt for the one with expander chip on board. There are 12 drive bays for 3.5” drives in the front and 2 for 2.5” in the rear. SB202-LB supports up to 6 PCIe 3.0 slots utilizing 64 lanes.

BTO Reference Model

SB402-LB is a 4U 36-bay storage server solution with 24 bays in the front and 12 in the rear. It comes with AIC’s E-ATX server board, Libra, which supports dual Intel® Xeon® processor E5-2600 v3 and v4 product family and 6 x PCIe 3.0 slots.

BTO Reference Model

GB109-PH, a 1U 4-bay general purpose server platform, supports dual Intel® Xeon® Processor E5 v3/v4 Product Family. The unit has four 3.5” hot-swap drive bays for HDDs. GB109-PH harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards up to four PCIe 3.0 expansion cards in 1U of space.

BTO Reference Model

TB101-PH, a NEBS/Telco appliance server platform, supports dual Intel® Xeon® Processor E5 v3/v4 Product Family. It has two 2.5” hot-swap drive bays in the front for OS drives. Either SSDs or HDDs can be used. TB101-PH harnesses MAX I/O™ technology, allowing up to two off-the-shelf PCIe 3.0 expansion cards in 1U of space.

J4060-02-35X, an entry level and cost effective 4U 60-Bay 12Gb/s JBOD, ideal for datacenter and warm/cold data storage. This JBOD enclosure with single expander supports 60 x 3.5” hot swap drives. Adopt new generation chips and optimized air flow design that offer you low power and energy saving solution. Comprehensive power supply solution helps you to deploy the JBOD everywhere and enlarge your business scope.

BTO Reference Model

J2024-03, a 2U 24-bay JBOF (just a bunch of flash), comes with 24 2.5” hot-swap drive bays to support NVMe PCIe U.2 drives. In a short depth design, it houses dual PCIe switch modules, dual hot-swap controllers and a redundant power supply. The J2024-03 is the perfect building block for an NVMe all-flash array storage solution, providing full redundancy, high-availability and extremely low-latency.

BTO Reference Model

The Aidos server board offers compelling performance and improved power efficiency, which is optimized for efficient performance platforms (storage,
security and communications infrastructure).

By implementing Intel® Xeon® Processor E5-2600 v3/v4 product family microarchitecture and QuickPath extension (QPX), Aidos server board delivers
unmatched performance, providing 2S support with four channels of DDR4 2400/2133MHz per socket, dual 10GbE SFP+ and 4 SFF-8643 connectors
which support PCIe SSDs through specific backplanes.

Featured with ground breaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (including AVX 2.0), Energy Efficient
Turbo, Increased Intel® QPI link speeds up to 9.6GT/s and DDR4 memory, the Aidos server board enables next generation server solutions with an incredible
leap in performance.

BTO Reference Model

The Aidos server board offers compelling performance and improved power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure).

By implementing Intel® Xeon® Processor E5-2600 v3/v4 product family microarchitecture and QuickPath extension (QPX), Aidos server board delivers unmatched performance, providing 2S support with four channels of DDR4 2400/2133MHz per socket, dual 10GbE SFP+ and 4 SFF-8643 connectors which support PCIe SSDs through specific backplanes.

Featured with ground breaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (including AVX 2.0), Energy Efficient Turbo, Increased Intel® QPI link speeds up to 9.6GT/s and DDR4 memory, the Aidos server board enables next generation server solutions with an incredible leap in performance.

BTO Reference Model

HA202-PH is a 2U 24-Bay NVMe storage server solution that provides high-availability with accelerated performance. The HA202-PH supports 24 dual-port U.2 NVMe PCIe SSDs. It comes with two AIC Phoenix Server Boards (one board per node), each supporting dual Intel® Xeon® Processors E5-2600 v3 or v4 product families. Both nodes process I/O, and provide simultaneous and balanced access to the logical devices, which significantly increases overall cluster performance. When failover occurs, the secondary node automatically takes over the devices, client connections, and all processes/services of the system. By eliminating SPOFs (single points of failure) and designed for redundancy and end-to-end data protection, the HA202-PH provides protection from storage system down time and loss of revenue when access to data resources and critical business applications are uninterruptible. Its support of NVMe SSDs allows for super-fast data access, and is optimized for mission-critical, enterprise-level storage applications.

The Pavo server board offers the latest Intel® Xeon® Scalable Processors technology solutions with compelling performance and provides premium power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure).
By implementing Intel® Xeon® Scalable Processors, fully integrated microarchitecture with AIC MAX I/O® 2.0, which support up to 64 lanes of PCIe Gen3, Pavo server board can maximize your I/O intensive application demand, providing six channels per CPU with total sixteen DIMM slots deployment which can support up to DDR4 2933/2666/2400MHz.
Featured with ground breaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (AVX-512, VMD, QAT - optional by PCH SKU), Speed Shift Technology, UPI link speeds up to 10.4GT/s, the Pavo server board enable next generation server solutions with an incredible leap in performance.

The Virgo server board offers the latest Intel® Xeon® Scalable Processors technology solutions with compelling performance and provides premium power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure).

By implementing Intel® Xeon® Scalable Processors, fully integrated microarchitecture, the Virgo server board delivers unmatched performance, providing six channels of DDR4 2933/2666/2400MHz per socket, dual 10GbE SFP+ and optional internal connector to support configurable dual-port for 10GbE (KR/SFI/XFI) or 1GbE (KX), and optional Broadcom SAS3008 SAS IOC onboard.

Featured with ground breaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (AVX-512, VMD, QAT - optional by PCH SKU), Speed Shift Technology, UPI link speeds up to 10.4GT/s, the Virgo server board enable next generation server solutions with an incredible leap in performance in a standard EATX form factor platform.

BTO Reference Model

The Grus server board offers the latest Xeon® E5-1600 v3/v4 technology solutions with compelling performance and provides premium power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure).

By implementing Intel® Xeon® Processor E5-1600 v3/v4, fully integrated microarchitecture with AIC MAX I/O® 2.0 which support up to 40 lanes of PCIe Gen3, Grus server board can maximize the I/O intensive application demand, providing four channels with eight DIMM slots deployment which can support up to 1024GB DDR4 2400/2133MHz.

Featured with ground breaking technologies including Intel® Xeon® E5 Microarchitecture, the Grus server board enable small form factor but meets
various application needs and offers the latest virtualization support at reasonable cost and provides the the ultimate solutions.

BTO Reference Model

Product Overview:
The Apollo server board is an Intel® Broadwell-DE SoC based platform which is built on 14nm process and is a 64-bit processor based on Intel® Broadwell Core supports VT-d/x, TXT, AES-NI and Xeon RAS, better for low power, high density design. 
By implementing Intel® Xeon-D SoC, with ADR protect DIMM Data in event of power failure, supports NTB failover, Intel® Quick Data to faster Direct Memory Access, 10G SFP+ driving by Inphi/Cortina CS4227 PHY, and also integrated within Broadcom/LSI SAS IO controller (SAS3008) and SAS expander chip (LSISAS3x28/3x36), Apollo server board is optimum for high-availability server storage application without extra cable link for better system integration.

Features:
•    Supports Intel® Xeon® processor D-1500 product family to meet low-power, high-density needs
•    Embedded components for 5+ years life cycle
•    Comes with Intel® integrated Magnolia Park in SoC + Inphi/Cortina CS4227 PHY support dual ports 10G SFP+
•    Integrated with SAS 12G IO Controller (SAS3008) + Expander chip better for HA Server Storage application
•    Onboard Baseboard Management Controller for system management and IPMI control
•    Rackmount Technology Extension (RTX) form factor utilizes full internal chassis volume for optimum I/O configurations

The Lynx server board offers 2nd Gen. Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors (Skylake/Cascade Lake) technology solutions with compelling performance and provides premium power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure).

By implementing 2nd Gen. Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors (Skylake/Cascade Lake), fully integrated microarchitecture with AIC MAX I/O® 2.0 which support up to 96 lanes of PCIe Gen3, Lynx server board can maximize your I/O intensive application demand, providing six channels per CPU with total twenty-four DIMM slots deployment which can support up to DDR4 2933/2666/2400MHz.
Featured with ground breaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (AVX-512, VMD, QAT - optional by PCH SKU), Speed Shift Technology, UPI link speeds up to 10.4GT/s, the Lynx server board enable next generation server solutions with an incredible leap in performance.

BTO Reference Model

HP201-AD is a 2U 4-Node hybrid storage server solution with 24x 2.5” NVMe/SAS/SATA SSD bays. It comes with 4x 4x AIC Aidos MB supports dual Intel® Xeon® Processors E5-2600 v3 and v4 product family. It has the optimized design for Hyper-Converged applications. Flexible Deployment/scale out one node at a time and transferring legacy software into cloud service easily.

BTO Reference Model

SB102-VG, a 1U 10-Bay 2.5" SAS/SATA Storage Server, supports dual Intel® Xeon® Scalable Processors. SB102-VG has 10 x 2.5" hot swap hard drive bays to provide a highly dense storage solution, also can be an Object Storage and All-Flash-Array server. Meanwhile, two 10GbE SFP+ ports would able to provide a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.

BTO Reference Model

FB122-PV, a 1U 10-Bay SFF Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. FB122-PV has 10 x 2.5” PCIe SSD hard drive bays to provide a highly dense, all NVMe Flash storage array.Harnesses MAX I/O™ technology, FB122-PV maximizing the usage of off-the-shelf expansion cards in the barebone.

BTO Reference Model

SB201-VG, a 2U 24x 2.5” SAS/SATA High-Density Storage Server, supports two Intel® Xeon® Scalable Processors. With 24 x 2.5" hot swap drive bays, 3 x 8038mm easy swap fans, and 1+1 redundant 80+ Platinum power supply, SB201-VG is optimized for both performance and power efficiency.

SB402-VG, a 4U 36x 3.5” SAS/SATA High-Density Storage Server, supports two Intel® Xeon® Scalable Processors. With 36 x 3.5" hot swap drive bays and 1+1 redundant 80+ Platinum power supply, SB402-VG is optimized for both performance and power efficiency.

SB405-PV, a 4U 102-Bay Ultra density storage server, supports new Intel® Xeon® Scalable Processors. It's flexible design to support Single/Dual processor controller and expander as JBOD applications, and smart IO usage with Max IO™ to support up to 1 PCIe 3.0 card. SB405-PV supports OCP Mezzanine Card and DDR4 2666 provides significant performance for a broad variety of usage models. 

BTO Reference Model

HA201-AP is a 2U 12/24Bay Cluster-in-a-box solution that provides high-availability in an active-active configuration. It comes with two Intel® Xeon-D Server Boards (one board per node). Both nodes process I/Os and provide simultaneous and balanced access to the logical devices, which increases overall cluster performance significantly. When failover occurs, the secondary node automatically takes over the devices, client connections, and all processes/services of the system. It provides protection from loss of revenue when access to data resources and critical business applications are disrupted. The HA201-AP eliminates SPOFs (single point of failures). Its support on SSDs allows faster access to data. It is optimized for mission-critical, enterprise-level storage applications.

BTO Reference Model

SB102-LB, a 1U 10-Bay SFF Storage Server Solution, supports dual Intel® Xeon® processors E5-2600 v3 and v4 product family. SB102-LB has 10 x 2.5” (front, 8xSAS 12G+2xSATA) hard drive bays to provide high storage density.

BTO Reference Model

SB121A-PH, a 1U 10-Bay SFF Storage Server Solution, supports dual Intel® Xeon® processors E5-2600 v3 and v4 product family. SB121A-PH has 10 x 2.5” (front, 8xSAS 12G+2xSATA) hard drive bays to provide high storage density. SB121A-PH harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the barebone.

BTO Reference Model

FB127-LX, a 1U 36-Bay server that supports 36 NF1 PCIe NVMe SSD hot-swap drives to provide a high density, all NVMe Flash storage array. At 16TB per NF1 NVMe SSD, the total raw capacity is up to 0.576PB in 1U. With dual Intel® Xeon® Scalable Family Processors, 24 DDR4 memory slots and a total of 300 Gb/s Ethernet, the FB127-LX delivers 10 million IOPS from NVMe SSD and 8 million IOPS over 300 Gb/s Ethernet. It is great for Scale-out, Scale-up, Database, Real-time analytics, Deep Learning, Content Distribution Network, etc.

J4078-01-35X, a 4U 78-Bay 12Gb/s SAS JBOD, ideal for high-availability storage and high performance appliance. This 4U 12Gb/s SAS JBOD enclosure with single or dual expanders supports 78 x 3.5” drives.

J4108-01-35X, a 4U 108-Bay 12Gb/s SAS JBOD, ideal for high-availability storage and high performance appliance. This 4U 12Gb/s SAS JBOD enclosure with single or dual expanders supports 108 x 3.5” drives.

RSC-1DT is a T-series 1U SAS/SATA storage server chassis supports external 4 x 12G 3.5" hot swap and internal 4 x 2.5" drive bays. This environmentally friendly solution features high-efficiency power supply, SGCC pre-plated steel, tool-less ball-bearing mounting rail, and easy-swap PWM fans, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

RSC-1DTS is a T-series 1U SAS/SATA storage server chassis supports external 4 x 12G 3.5" hot swap and internal 4 x 2.5" (9mm) drive bays. This environmentally friendly solution features high-efficiency power supply, SGCC pre-plated steel, tool-less ball-bearing mounting rail, easy-swap PWM fans, and overall short depth, offering a cost-effective solution ideally suited for a broad range of applications, and especially space-concerned users. (Power supply is included. Motherboard is not included.)

RSC-1AT is a T-series 1U SAS/SATA storage server chassis supports 8 x 12G 2.5" and 2 x 6G 2.5" hot swap drive bays. This environmentally friendly solution features high-efficiency power supply, SGCC pre-plated steel, tool-less slide rail, and easy-swap PWM fans, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

BTO Reference Model

• 1U FIPS/NEBS compliant network appliance
• Supports one Intel® Xeon® Processor E3-1200 v5/v6 Product Family
• With Intel® C236 chipset to provide 5+ years product life cycle
• Flexible I/O design with MAX I/O® technology to support up to 2 COTS PCIe 3.0 add-in cards in a 20” depth 1U
• Two server class GbE ports
• Onboard Baseboard Management Controller for system management and IPMI control
• Front-to-back airflow and hot swap redundant fans to provide optimal thermal conditions

BTO Reference Model

• 2U FIPS/NEBS compliant network appliance
• Supports one Intel® Xeon® Processors E3-1200 v5/v6 Product Family
• With Intel® C236 Chipset to provide 5+ years product life cycle
• Flexible I/O design with MAX I/O™ technology to support up to 3 COTS PCIe 3.0 add-in cards in a 20” depth 2U
• Two server class GbE ports
• Onboard Baseboard Management Controller for system management and IPMI control
• Front-to-back airflow and hot swap redundant fans to provide optimal thermal conditions
• Customizable to meet your requirements

BTO Reference Model

J2024-04, a 2U 24-bay JBOF (just a bunch of flash), comes with 24 2.5” hot-swap drive bays to support NVMe PCIe U.2 drives. The J2024-04 is the perfect building block for an NVMe all-flash array storage solution, providing full redundancy, high-availability and extremely low-latency. 

The Auriga server board offers the latest AMD EPYC™ SoC technology which can support the highest core count in an x86-architecture with EPYC™7003/7002/7001 processor, more main memory capacity and bandwidth with greater efficiency and greatest I/O density.

Auriga has I/O bandwidth that matches the capability of the CPU cores to move data to and from the network, spinning disks, NVMe storage, and  graphics acceleration devices. By offering the parallelism to speed high performance computing environments, machine learning and predictive analysis benefit from the capability to process more data in memory and to accelerate computation with more direct GPU connectivity.

HA202-PV is a 2U 24-Bay NVMe storage server solution that provides high-availability with accelerated performance. HA202-PV comes with two AIC Pavo Server Boards (one board per node), each supporting dual Intel® Xeon® Scalable Processors. Both nodes process I/O, and provide simultaneous and balanced access to the logical devices, which significantly increases overall cluster performance. When failure occurs, the secondary node automatically takes over the devices, client connections, and all processes/services of the system. By eliminating SPOFs (single points of failure) and designed for redundancy and end-to-end data protection, the HA202-PV provides protection from storage system down time and loss of revenue when access to data resources and critical business applications are in-interruptible. Its support of NVMe SSDs allows for super-fast data access, and is optimized for mission-critical, enterprise-level storage applications.

BTO Reference Model

SB101-LB, a 1U Storage Server Solution, supports dual Intel® Intel® Xeon® Processors E5-2600 v3/v4 product family. SB101-LB has 4 x 3.5” (front) hot-swappable and 4x 2.5" internal HDD/SSD bays to provide high storage density. SB101-LB also has built in 2x10GbE RJ45 ports and SAS12G controller to save the space and cost of adding the cards.

BTO Reference Model

SB101-LE, a 1U Storage Server Solution, supports Intel® Xeon® Processors E3-1200 v5/v6 product family. SB101-LE has 4 x 3.5'' (tool-less) hot-swappable and 4x 2.5" internal HDD/SSD bays to provide high storage density.

BTO Reference Model

SB103-LB, a 1U 8-Bay Storage Server Solution, supports dual Intel® Xeon® Processors E5-2600 v3 and v4 product family. It has 8 x 3.5” hot swap internal drive bays. SB103-LB supports up to 8 PCIe 3.0 slots.

BTO Reference Model

SB202-LE, a 2U 12-bay entry level storage server solution, supports Intel® Xeon® E3-1200 v5/v6 Processors. Tool-less design SAS 12G backplane with options for built-in expander or passive board which are providing 12x 3.5" drive bays in the front and 2x 2.5” drive bays in the rear. SB202-LE provides 1x PCIe 3.0 X8 + 2x PCIe 2.0 X1 slots for add-on cards.

BTO Reference Model

SB101-VG, a 1U Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. SB101-VG has 4 x 3.5” (front) hot-swappable and 4x 2.5" internal HDD/SSD bays to provide high storage density. SB101-VG also has built in 2x10GbE SFP+ ports and SAS12G controller to save the space and cost of adding the cards.

BTO Reference Model

SB202-VG, a 2U 12-bay storage server solution, supports dual Intel® Xeon® Scalable Processors. Tool-less design SAS 12G backplane with options for built-in expander or passive board which are providing 12x 3.5" drive bays in the front and 2x 2.5” in the rear. SB202-VG provides  5x PCIe 3.0 slots for add-on cards.

BTO Reference Model

The Lepus implementing the next generation 14nm Intel® Xeon® processor E3-1200 v5/v6 series benefits of the Skylake and Kaby Lake processor architecture with available Gen3 PCI Express and more memory support in standard ATX form factor, offers compelling performance and improved power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure).

The Lepus series server board delivers unmatched performance, providing support with two channels of DDR4 2400/2133MHz ECC UDIMM, up to 4x1GBase-T, and optional Broadcom/LSI SAS 3008 IOC onboard. Lepus series server board enables next generation server solutions with an incredible leap in performance in a standard ATX form factor platform.

BTO Reference Model

RMC-2S chassis is an ideal choice for entry-level Server. A PS/2 power supply provides price advantage over 2U size slim power supply. 

BTO Reference Model

RMC-3S is designed for entry-level applications, A PS/2 power supply provides price advantage, power are preposition.  

BTO Reference Model

SB302-VG, a 3U 16-Bay General Purpose Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. Tool-less design SAS 12G backplane with options for built-in expander or passive board which are providing 16x 3.5" drive bays in the front and 2x 2.5” in the rear. SB302-VG provides  5x PCIe 3.0 slots for add-on cards.

SB401-VG, a 4U 24-Bay General Purpose Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. Tool-less design SAS 12G backplane with options for built-in expander or passive board which are providing 24x 3.5" drive bays in the front and 2x 2.5” in the rear. SB401-VG provides 5x PCIe 3.0 slots for add-on cards.

SB403-VG, a 4U 60-Bay High Density Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. Tool-less swappable SAS 12G backplane with built-in expander providing 60x 3.5" top-loading drive bays in the front. SB403-VG provides 5x PCIe 3.0 slots for add-on cards and suitable for cold storage which requires the capacity for vast amount of data.

BTO Reference Model

SB406-PV, a 4U 72-Bay High Density Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. SAS 12G backplane with built-in expander providing 72x 3.5" and 2x 2.5” top-loading drive bays. SB406-PV provides 1x OCP v2.0 MEZZ card slots for add-on cards and suitable for cold storage which requires the capacity for vast amount of data.

BTO Reference Model

FB201-LX, a 2U 24-Bay SFF Storage Server Solution, supports dual Intel® Xeon®  Scalable Processors and 24x DDR4 2666 RDIMM. FB201-LX has 24 x 2.5” NVMe U.2 SSD bays to provide a highly dense pure flash array solution. FB201-LX harnesses MAX I/O™ technology, maximizing the usage of off-the-shelf expansion cards in the barebone.

This drive enclosure converts 1 x 5.25 drive bay to 2 x 2.5 SFF T-tray hot swap bays, supporting SATA interface.

BTO Reference Model

This NF1 PCIe SSD adapter enable two NF1  or M.2 NVMe SSD into a U.2 form factor of any server system. The adapter  accommodate NF1 or M.2 SSD into your currently system with U.2 support.

BTO Reference Model

This NF1 PCIe SSD adapter enable two  NF1  or M.2 NVMe SSD into a PCIe 8 lanes slot of any server system. The adapter  accommodate NF1 or M.2 SSD into your currently system without any redesign effort.

BTO Reference Model

This NF1 PCIe SSD adapter enable the NF1  or M.2 NVMe SSD into a PCIe 4 lanes slot of any server system. The adapter  accommodate NF1 or M.2 SSD into your currently system without any redesign effort.

BTO Reference Model

SB101-SP, a 1U Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. SB101-SP has 4 x 3.5” (front) hot-swappable and 2x 2.5" internal HDD/SSD bays to provide high storage density.

BTO Reference Model

SB102-SP, a 1U 10-Bay Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. SB102-SP has 8 x 2.5” 12G SAS hot-swappable and 2x 2.5" 6G SATA HDD/SSD bays to provide high storage density.

BTO Reference Model

SB202-SP, a 2U 12-Bay Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. SB202-SP has 12 x 3.5” hot-swappable and 2x 2.5" (7mm) rear HDD/SSD bays to provide high storage density.

BTO Reference Model

SB101-UR, a 1U 4-Bay Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. SB101-UR has 4 x 3.5” (front) hot-swappable and 2x 2.5" internal OS HDD/SSD bays to provide high storage density.

BTO Reference Model

SB102-UR, a 1U 10-Bay Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. SB102-UR has 8 x 2.5” 12G SAS hot-swappable and 2x 2.5" 6G SATA HDD/SSD bays to provide high storage density.

Front bezel for 1U T-series products. It is an option to be added.

Key Features 
• Honeycomb vent design , maximize ventilation rate
• Tool less design
• Security lock
• Support customize name plate/ silkscreen
• Various options for paint spray

Front bezel for 2U T-series products. It is an option to be added.

Key Features 
• Honeycomb vent design , maximize ventilation rate
• Tool less design
• Security lock
• Support customize name plate/ silkscreen
• Various options for paint spray

Front bezel for 3U T-series products. It is an option to be added.

Key Features 
• Honeycomb vent design , maximize ventilation rate
• Tool less design
• Security lock
• Support customize name plate/ silkscreen
• Various options for paint spray

Front bezel for 4U T-series products. It is an option to be added.

Key Features 
• Honeycomb vent design , maximize ventilation rate
• Tool less design
• Security lock
• Support customize name plate/ silkscreen
• Various options for paint spray

BTO Reference Model

The Ursa server board offers the latest Xeon® Scalable Processors technology solutions with compelling performance and provides premium power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure).

By implementing Intel® Xeon® Scalable Processors, fully integrated microarchitecture support four PCIe Gen3 x16 slots, plus two OCP Mezzanine extension connectors (one is with x16 lanes, the other one is x8). Ursa server board provide dual 10GbE SFP+ networking interface, providing six channels per CPU with total twenty-four DIMM slots deployment which can support up to DDR4 2933/2666/2400MHz..

Featured with ground breaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (AVX-512, VMD, QAT - optional by PCH SKU), Speed Shift Technology, UPI link speeds up to 10.4GT/s, the Ursa server board enable next generation server solutions with an incredible leap in performance.

BTO Reference Model

The Spica server board offers the latest Xeon® Scalable Processors technology solutions with compelling performance and provides premium power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure).

By implementing Intel® Xeon® Scalable Processors, fully integrated microarchitecture, the Spica server board delivers unmatched performance, providing six channels of DDR4 2933/2666/2400MHz per socket, two GbE RJ45 powered by Intel® Ethernet Controller I350 and optional 10GbE SFP+ dual-port supported by Intel® Lewisburg PCH.

Featured with ground breaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (AVX-512, VMD, QAT - optional by PCH SKU), Speed Shift Technology, UPI link speeds up to 10.4GT/s, the Spica server board enable next generation server solutions with an incredible leap in performance in a standard EATX form factor platform.

BTO Reference Model

The Mensa server board offers the latest Xeon® Scalable Processors technology solutions with compelling performance and provides premium power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure).

By implementing Intel® Xeon® Scalable Processors, fully integrated microarchitecture, the Mensa server board delivers unmatched performance,
providing six channels of DDR4 2666/2400MHz (feature supports up to DDR4 2933MHz by next gen. process upgrade) per socket, dual port RJ-45 10GBase-T power by Intel X550-AT2. With various selections that support PCIe Gen3 x16 and PCIe Gen3 x16 with 5 sets of one PCI Express Gen3 x16 or two Gen3 x8, we provide the best combination for PCI Express Bifurcation.

Featured with ground breaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (AVX-512, VMD, QAT - optional by PCH SKU), Speed Shift Technology, UPI link speeds up to 10.4GT/s, the Mensa server board enable next generation server solutions with an incredible leap in performance.

BTO Reference Model

SB403-LB is a 4U 62-bay storage server solution. It comes with AIC’s E-ATX server board, Libra, which supports dual Intel® Xeon® processor E5-2600 v3 product family and 7 x PCIe 3.0 slots.

Legacy Product

With in-house expert design, AIC Rack –Venus is highly flexible with efficiency and simplifies the maintenance to fulfill varieties demands of the new generation data center.

Legacy Product

XA3-DA001-XX is a 1OU dual-node compute blade. It comes with two AIC server boards, each supporting dual Intel® Xeon® scalable processor technology solution with compelling performance and provides premium power efficiency. It is engineered to expedite high performance computing workloads.

Legacy Product

XA3-SA001-XX is a 1OU single-node storage blade. It is equipped with an AIC server board and 6 3.5” drives. The server board supports dual Intel® Xeon® Processors Scalable Family. It serves as a computing node and provides storage capability at the same time. The drive trays are screw-less. This makes service and upgrade easy and fast.

Legacy Product

XA3-SN001-XX is a 1OU single-node storage blade. It is equipped with an AIC server board and 10 NVMe drives. The server board supports dual Intel® Xeon® Processors Scalable Family. It serves as a computing node and provides storage capability at the same time. The drive trays are screw-less. This makes service and upgrade easy and fast.

Legacy Product

XJ1-20302-XX is a 2OU 30-Bay high density JBOD node that enables easy expansion of storage. It is consisted of two drive drawers to support a total of 30 drive bays. The drive drawers are designed with sliding and locking mechanism. The hot-swap drive bays are tool-less. With these features, service and upgrade become easy.

RSC- 2KT is a T-series 2U 8-bay SAS/SATA storage server chassis. RSC-2KT structure form are based on quick installation, easy maintenance and cost competitive, with tool-less design 3.5” and 2.5” hard drive carriers and top cover. Fan are Easy swap design X3 with low-power consumption, SPGC pre-plated steel with minimal paint , offering a cost- effective solution ideally suited for a broad range of application. (Power supply is included. Motherboard is not included).

BTO Reference Model

FB128-LX, a 1U 36-Bay server that supports 36 EDSFF (Enterprise & Data Center SSD Form Factor), Enterprise and Datacenter 1U short SSD Form Factor to provide a high density, all NVMe Flash storage array. Supports two Intel® Xeon® Scalable Processors family. Flexible I/O usage with Max I/O® to support 1 x PCIe Gen3 x16 and 1 x PCIe Gen3 x8 add-on cards through riser.

BTO Reference Model

SB201-UR, a 2U 24-Bay Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. SB201-UR has 24 x 2.5” hot-swappable HDD/SSD and 2x 2.5" HDD/SSD bays at rear to provide high storage density.

BTO Reference Model

SB202-UR, a 2U 12-Bay Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. SB202-UR has 12 x 3.5” hot-swappable HDD/SSD and 2x 2.5" hot swap 15mm HDD/SSD bays at rear to provide high storage density.

BTO Reference Model

SB203-UR, a 2U 8-Bay Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. SB203-UR has 8 x 3.5” hot-swappable drive bays and 2x 2.5" drive bays at the rear to provide high storage density.

BTO Reference Model

SB401-MN, a 4U 24-Bay storage server solution with multiple cards supporting, supports dual Intel® Xeon® Scalable Processors. SB401-MN has 24 x 3.5” hot-swappable HDD/SSD and 2x 2.5" hot swap 7mm HDD/SSD bays at rear to provide high storage density. Optional for 2 internal drive brackets.

RSC-1ATS is a T-series 1U SAS/SATA storage server chassis supports 8 x 12G 2.5" and 2 x 6G 2.5" hot swap drive bays. This environmentally friendly solution features high-efficiency power supply, SGCC pre-plated steel, tool-less slide rail, and easy-swap PWM fans, offering a cost-effective solution ideally suited for a broad range of applications. (Power supply is included. Motherboard is not included.)

BTO Reference Model

As the manager or operator of a data center, it is important to maintain tight control over costs while providing the maximum uptime for your customers. For that reason, AIC has developed the RSC-2M, a 2U 24-Bay storage server chassis. It enables data center services companies that run object storage applications a more efficient and economical solution. The tool-less design makes installation and maintenance quick and easy. Rubbers on the drive tray and silicon gaskets protect against vibrations. Its high-density, space-saving design saves you money. Its drives can be hot swapped at a moment’s notice, resulting in less downtime. Even though RSC-2M was initially designed for data centers, the aforementioned features make it a good solution for media production as well. (Power supply is included. Motherboard is not included.)

BTO Reference Model

The Caelum server board uniquely features the latest single AMD EPYC™ 7000-series processor(Rome/Naples) with up to 32 AMD Zen x86 cores and higher memory capacity of 8 slots up to 1TB. Based on AMD Zen microarchitecture, distinguished for 32 cores and 64 threads, AMD Security Root-of-Trust Technology for advanced data protection, and integrating a single processor socket for greater I/O extensions, the server board is genuinely dedicated to offer an ideal choice for pursuing greater bandwidth, reduced power consumption, and scalability in your server.

With the goal of optimization, this product seeks to achieve versatility, system expansion, and easy management. The server board implements PCIe Gen3 slots, PCIe Slimline connectors, SATA (support RAID 0/1) with support for various edge connectors, including COM, VGA, and USB 3.0 ports. Innovatively integrating BIOS Insyde and Aspeed AST2500 Advanced PCIe Graphics to the server board, Caelum profoundly delivers immediate and efficient control with Onboard Baseboard Management Con¬troller for managing heavy workflow and executing complex operations.

BTO Reference Model

FB127-AG, a 1U 36-Bay server that supports 36 NF1 (Next Generation Form Factor) NVMe SSD hot-swap drives to provide a high density, all NVMe Flash storage array. At 16TB per NF1 NVMe SSD, the total raw capacity is up to 0.576PB in 1U. With dual AMD® EPYC® MB, each contains 8 DDR4 memory slots and a total of 300 Gb/s Ethernet(600Gb/s per system), the FB127-AG delivers 20 million IOPS from NVMe SSD and 16 million IOPS over 600 Gb/s Ethernet. It is great for Scale-out, Scale-up, Database, Real-time analytics, Deep Learning, Content Distribution Network, etc.

J4060-03-03X, a 4U 60-Bay 12Gb/s SAS JBOD, ideal for high-availability storage and high performance appliance. This 4U 12Gb/s SAS JBOD enclosure with single or dual expanders supports 60 x 3.5” hot swap drives.

SB203-LX, the 2U design supports 6x PCIe Gen.3 X16 slots, dual Intel® Xeon® 2nd generation Scalable Processors, and 8 x 3.5” front hot-swappable plus 2x 2.5” internal drive bays to provide general purpose GPU server solution.

BTO Reference Model

Specifictaions and photos are subject to change without notice. Please check with your local AIC sales rep. to confirm the final specifications.

BTO Reference Model

Specifictaions and photos are subject to change without notice. Please check with your local AIC sales rep. to confirm the final specifications.

HP201-AG is a 2U 4-Node hybrid storage server solution with 24x 2.5” NVMe/SAS/SATA + 8x 2.5” SATA bays. It comes with 4x AIC Auriga MB supports single AMD® EPYC® Processors (EPYC™ 7002/EPYC™ 7001) family. Up to 3x PCIe X16 add-on cards for Network/HBA/RAID… features expansion. It has the optimized design for Hyper-Converged applications. Flexible Deployment/scale out one node at a time and transferring legacy software into cloud service easily.

HP202-AG is a 2U 4-Node server solution with 12x 3.5” SAS/SATA + 8x 2.5” SATA bays. It comes with 4x AIC Auriga MB supports single AMD® EPYC® Processors (EPYC™ 7002/EPYC™ 7001) product family. Up to 3x PCIe X16 add-on cards for Network/HBA/RAID… features expansion. It has the optimized design for Hyper-Converged applications. Flexible Deployment/scale out one node at a time and transferring legacy software into cloud service easily.

The Vela server board offers the latest Xeon® Scalable Processors technology solutions with compelling performance and provides premium power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure).

By implementing Intel® Xeon® Scalable Processors, fully integrated microarchitecture supports up to 72 lanes of PCIe Gen3, providing six channels
per CPU with total sixteen DIMM slots deployment which can support up to DDR4 2933/2666/2400MHz, Vela server board can meet both cost efficiency and performance requirement for lots of applications.

Featured with ground breaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (AVX-512, VMD, QAT - optional by PCH SKU), Speed Shift Technology, UPI link speeds up to 10.4GT/s, the Vela server board enable next generation server solutions with an incredible leap in performance.

BTO Reference Model

Specifictaions and photos are subject to change without notice. Please check with your local AIC sales rep. to confirm the final specifications.

BTO Reference Model

CB201-Z1, a 2U 4x double width + 2x low-profile PCIe Gen.3 slots, supports dual Intel® Xeon® Scalable Processors and  6 x 2.5” internal drive bays to provide density GPU server solution in compact size.

RSC- 2KTS is a T-series 2U 8-bay SAS/SATA storage server chassis. RSC-2KTS structure form are based on quick installation, easy maintenance and cost competitive, with tool-less design 3.5” and 2.5” hard drive carriers and top cover. Fan are Easy swap design X3 with low-power consumption, SPGC pre-plated steel with minimal paint , offering a cost- effective solution ideally suited for a broad range of application. (Power supply is included. Motherboard is not included).

As the manager or operator of a data center, it is important to maintain tight control over costs while providing the maximum uptime for your customers. For that reason, AIC has developed the RSC-2MS, a 2U 24-Bay storage server chassis. It enables data center services companies that run object storage applications a more efficient and economical solution. The tool-less design makes installation and maintenance quick and easy. Rubbers on the drive tray and silicon gaskets protect against vibrations. Its high-density, space-saving design saves you money. Its drives can be hot swapped at a moment’s notice, resulting in less downtime. Even though RSC-2MS was initially designed for data centers, the aforementioned features make it a good solution for media production as well. (Power supply is included. Motherboard is not included.)

BTO Reference Model

Specifictaions and photos are subject to change without notice. Please check with your local AIC sales rep. to confirm the final specifications.

BTO Reference Model

FB128-AG, a 1U dual node storage server that supports 36 E1.S (EDSFF) Enterprise and Datacenter 1U short SSD Form Factor to provide a high density, all NVMe flash storage array. FB128-AG supports AMD EPYC™ 7002/7001 processor (Rome/Naples) that based on the AMD "Zen" microarchitecture for highest server performance. It is great for Scale-out, Scale-up, Database, Real-time analytics, Deep Learning, Content Distribution Network, etc.

HP201-VL is a 2U 4-Node hybrid storage server solution with 24x 2.5” NVMe + 8x 2.5” SATA bays. It comes with 4x AIC Vela MB supports dual Intel® Xeon® Scalable Processors (Cascade Lake Refresh/Cascade Lake/Skylake) family. Up to 3x PCIe X16 add-on cards for Network/HBA/RAID… features expansion. It has the optimized design for Hyper-Converged applications. Flexible Deployment/scale out one node at a time and transferring legacy software into cloud service easily.

HP202-VL is a 2U 4-Node server solution with 12x 3.5” SAS/SATA + 8x 2.5” SATA bays.. It comes with 4x AIC Vela MB supports dual Intel® Xeon® Scalable Processors (Cascade Lake Refresh/Cascade Lake/Skylake) family. Up to 3x PCIe X16 add-on cards for Network/HBA/RAID… features expansion. It has the optimized design for Hyper-Converged applications. Flexible Deployment/scale out one node at a time and transferring legacy software into cloud service easily.

HA401-VG is a 4U 24x SAS 12Gbs bay system with provides high-availability in an active-active configuration. It comes with two AIC Server Boards (one board per node), each supporting dual Intel® Xeon® Scalable family (SKYLAKE/CASCADE LAKE/CASCADE LAKE REFRESH) processors. Both nodes process I/Os and provide simultaneous and balanced access to the logical devices, which increases overall cluster performance significantly. When failover occurs, the secondary node automatically takes over the devices, client connections, and all processes/services of the system. It provides protection from loss of revenue when access to data resources and critical business applications are disrupted. The HA401-VG eliminates SPOFs (single point of failures). It is optimized for mission-critical, enterprise-level storage applications.

SB101-A6, a 1U 4-Bay Storage Server Solution, supports dual 3rd Gen Intel® Xeon® Scalable Processors (codename Ice Lake). SB101-A6 has 4 x 3.5” (front) hot-swappable and 2x 2.5" internal OS HDD/SSD bays to provide high storage density.

BTO Reference Model

The Crux implementing the 14nm Intel® Xeon® processor architecture with available Gen3 PCI Express and more memory support in standard ATX form factor, offers compelling performance and improved security and communications infrastructure. The Crux series server board delivers unmatched performance, providing support with two channels of DDR4 2666/2400 ECC UDIMM, up to 4x1GBase-T, and optional Broadcom/LSI SAS 3008 IOC onboard. Crux series server board enables next generation server solutions with an incredible leap in performance in a standard ATX form factor platform.

Built to Order

The Elpis server board uniquely features the latest single AMD EPYC™ 7003/7002/7001 processor with up to 64 AMD Zen x86 cores and higher memory capacity of 8 slots up to 2TB. Based on AMD Zen microarchitecture, distinguished for 64 cores and 128 threads, AMD Security Root-of-Trust Technology for advanced data protection, and integrating a single processor socket for greater I/O extensions, the server board is genuinely dedicated to offer an ideal choice for pursuing greater bandwidth, reduced power consumption, and scalability in your server. With the goal of optimization, this product seeks to achieve versatility, system expansion, and easy management. The server board implements PCIe Gen4 slots, PCIe Slimline connectors, SATA (support RAID 0/1) with support for various edge connectors, including COM, VGA, and USB 3.0 ports. Innovatively integrating BIOS Insyde/AMI and Aspeed AST2500 Advanced PCIe Graphics to the server board, Elpis profoundly delivers immediate and efficient control with Onboard Baseboard Management Controller for managing heavy workflow and executing complex operations.

The RMC-2E chassis is AIC first model focus on Edge-Computing appliance product. Its flexibility of support both front and rear I/O is the biggest feature on ALL application scenarios. The flexible and variable can easily reach through simple change/adjustment on the field. The 450mm depth is easy to implement into all cabinets.

HA201-PV is a 2U 24-SFF-Bay Cluster-in-a-box solution that provides high-availability in an active-active configuration. It comes with two AIC PAVO Server Boards (one board per node), each supporting dual Intel® Xeon® Scalable/2nd Gen Scalable processors product family. Both nodes process I/Os and provide simultaneous and balanced access to the logical devices, which increases overall cluster performance significantly. When failover occurs, the secondary node automatically takes over the devices, client connections, and all processes/services of the system. It provides protection from loss of revenue when access to data resources and critical business applications are disrupted. The HA201-PV eliminates SPOFs (single point of failures). Its support on SSDs (SAS/Nearline-SAS) allows faster access to data. It is optimized for mission-critical, enterprise-level storage applications.

SB405-VL, a 4U 102-Bay Ultra density storage server, the built-in system MB supports dual Intel® Xeon® Scalable / 2nd Generation Scalable Processors. With the flexible PCIe 3.0 extension design for SAS HBA / SAS RAID / Ethernet / FC …. cards on 2x PCIe X16 slots and 1xOCP Mezzanine which provide significant IO performance.

J4024-04-35X is an innovative 4U24 JBOD that integrates 3.5" SAS (12G, dual) / SATA (6G, single) disk drive, Broadcom SAS35X-Series expander chip, and board-to-board connection design into a compact and stable system with exceeding productivity.

J5010-02-G4 is a highly compact Gen4 PCIe JBOX with PCIe switch and 2 sets of SFF-8644 for host uplink. Featuring the PCIe Gen4 switch, Broadcom Altas PEX88096, this product provides agile performance and productivity.

The Sail server board offers the latest Xeon® Scalable Processors technology solutions with compelling performance and provides premium power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure)

By implementing Intel® Xeon® Scalable Processors, fully integrated microarchitecture supports up to 3 x 16 lanes of PCIe Gen4 with specific RC by only one CPU (CPU0) installation at 1U height, providing eight channels per CPU with total sixteen DIMM slots deployment which can support up to DDR4 3200/2933MHz, Sail server board can meet both cost efficiency and
performance requirement for lots of applications.

Featured with groundbreaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (AVX-512, VMD), Speed Shift Technology, UPI link speeds up to 11.2GT/s, the Sail server board enables next generation server solutions with an incredible leap in performance.

J2024-06-35X is an innovative 2U24 JBOD that integrates 2.5" SAS (12G, dual) / SATA (6G, single) disk drive, Broadcom SAS35X-Series expander chip, and board-to-board connection design into a compact and stable system with exceeding productivity.

J2012-03-35X is an innovative 2U12 JBOD that integrates 3.5" SAS (12G, dual) / SATA (6G, single) disk drive, Broadcom SAS35X-Series expander chip, and board-to-board connection design into a compact and stable system with exceeding productivity.

The Delphinus server board offers the latest Xeon® E-2300 Processors technology solutions with compelling performance and provides premium power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure)

By implementing Intel® Xeon® E-2300 Processors, fully integrated microarchitecture supports up to 3 x 16 lanes of PCIe Gen4 with specific RC by only one CPU (CPU0) installation at 1U height, providing two channels per CPU with total four ECC DIMM slots deployment which can support up to DDR4 3200/2933MHz, Delphinus server board can meet both cost efficiency and
performance requirement for lots of applications.

Featured with groundbreaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (AVX-512, VMD), Speed Shift Technology, the Delphinus server board enable next-generation server solutions with an incredible leap in performance.

CB121-VL, a 1U 1x double-width + 1x FHHL + 1x OCP v2.0 PCIe Gen.3 slots, supports dual 2nd Gen Intel® Xeon® Scalable Processors and  2 x 2.5” hot-swappable drive bays to provide a GPU server solution in compact size.

• 1U FIPS/NEBS compliant network appliance
• Supports one Intel® Xeon® Processor E-2300 (Rocket Lake) product family
• With Intel® C256 chipset to provide 5+ years product life cycle
• Flexible I/O design with MAX I/O technology to support 2x PCIe 4.0 add-in cards in short depth 1U
• Onboard Baseboard Management Controller for system management and IPMI control
• Front-to-back airflow and hot-swap redundant fans to provide optimal thermal conditions
• Supports intrusion switch

The Pegasus server board offers the latest Xeon® Scalable Processors technology solutions with compelling performance and provides premium power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure).

By implementing Intel® Xeon® Scalable Processors, fully integrated microarchitecture supports up to 128 lanes of PCIe Gen4, providing eight channels per CPU with total sixteen DIMM slots deployment which can support up to DDR4 2666/2933/3200MHz, Pegasus server board can meet both cost efficiency and performance requirement for lots of applications.

Featured with groundbreaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (AVX-512, VMD, QAT – not included in PCH C621A SKU), Speed Shift Technology, UPI link speeds up to 11.2GT/s, the Pegasus server board enable next generation server solutions with an incredible leap in performance.

• 2U general purpose storage server supports 12 hot-swap 3.5”/2.5” universal SATA/SAS/NVMe U.2 drive bays
• Supports 3rd Gen. Intel® Xeon® Scalable processors (code name Ice Lake)
• Onboard Baseboard Management Controller for system management and IPMI control
• Front-to-back airflow and hot-swap redundant fans to provide optimal thermal conditions
• Dedicated BMC management port

The Tucana server board offers the latest Xeon® Scalable Processors technology solutions with compelling performance and provides premium power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure)

By implementing Intel® Xeon® Scalable Processors, fully integrated microarchitecture supports up to 3 x 16 lanes, 2 x8 lanes, 4 slimline x8 of PCIe Gen4 and one OCP 3.0 PCIe Gen4, providing eight channels per CPU with total sixteen DIMM slots deployment which can support up to DDR4 3200/2933MHz, Tucana server board can meet both cost efficiency and performance requirement for lots of applications.

Featured with ground breaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (AVX-512, VMD), Speed Shift Technology, UPI link speeds up to 11.2GT/s, the Tucana server board enable next generation server solutions with an incredible leap in performance.

J4078-02-04X, a 4U 78-Bay 24Gb/s SAS JBOD, ideal for high-availability storage and high-performance appliance.
This 4U 24Gb/s SAS JBOD enclosure with single or dual expanders supports 78 x 3.5” drives. (Support 2.5” with optional kit)

SB102-TU, a 1U 10-bay storage server solution. It supports 3rd Gen Intel® Xeon® Scalable Processors with PCIe 4.0 extension design. It has Rackmount Technology Extension (RTX) form factor utilizes and Onboard Baseboard Management Controller for system management and IPMI control.

RSC-4H1 is a new 4U 60-Bay high-density storage server chassis with tool-less design features. Unlike typical 4U server chassis which accommodate 24 or 36 drives, RSC-4H1 supports 60 top-loading 3.5” drive trays to save rack space, and option in 2/4/6/8 bay 2.5” SATA/SAS or 8bay 2.5” NVMe for OS or cache. It is suitable for cold storage which requires the capacity for vast amount of data but allows slower data retrieval and response time. Some suitable applications include media storage, medical imaging, email archiving, public or private cloud storage and data warehousing. Tool-less features on drive trays, top cover and sliding mechanism make assembly and maintenance quick and easy. (Power supply is included. Motherboard is not included.)

SB201-A6, a 2U 24-bay high-density storage server solution. It supports 3rd Gen Intel® Xeon® Scalable Processors with PCIe 4.0 extension design.  SB201-A6 has 24 x 2.5” (front)NVMe and 2x2.5" SATA(rear)  hot-swappable bays to provide the highest storage density and optimized performance for the applications.

The A6 server board offers the latest Xeon® Scalable Processors technology solutions with compelling performance and provides premium power efficiency, which is optimized for efficient performance platforms (storage, security and communications infrastructure)

By implementing Intel® Xeon® Scalable Processors, fully integrated microarchitecture supports up to 2 x 24 lanes, 1 x16 lanes, 6 slimlinex8 of PCIe Gen4 and one OCP 3.0 PCIE Gen4, providing eight channels per CPU with total 32 DIMM slots deployment which can support up to DDR4 3200/2933MHz, A6 server board can meet both cost efficiency and performance requirement for lots of applications.

Featured with groundbreaking technologies including Intel® Next Generation Microarchitecture and Instruction Set (AVX-512, VMD), Speed Shift Technology, UPI link speeds up to 11.2GT/s, the A6 server board enables next-generation server solutions with an incredible leap in performance.

SB101-TU, a 1U 4-bay storage server solution. It supports 3rd Gen Intel® Xeon® Scalable Processors with PCIe 4.0 extension design. It has Rackmount Technology Extension (RTX) form factor utilizes and Onboard Baseboard Management Controller for system management and IPMI control.

SB201-TU, a 2U 24-bay high-density storage server solution. It supports 3rd Gen Intel® Xeon® Scalable Processors with PCIe 4.0 extension design. It has Front-to-back airflow and hot-swap redundant fans to provide optimal thermal conditions and Onboard Baseboard Management Controller for system management and IPMI control.

SB202-TU, a 2U 12-bay storage server solution. It supports 3rd Gen Intel® Xeon® Scalable Processors with PCIe 4.0 extension design. It has Front-to-back airflow and hot-swap redundant fans to provide optimal thermal conditions and Onboard Baseboard Management Controller for system management and IPMI control.

EB202-CP performance in a short-depth form factor, it is ideal for 5G, low-latency, and computing edge applications. Supports Zen4 AMD EPYC™ 9004 series processors with PCIe Gen5 extension design. It supports Gen5 hot swappable EDSFF, can equip eight Gen5 E1.S/E3.S or four Gen4 U.2 NVMe, quickly remove all storage(8bay), achieve an extra layer of security.

SB407-TU, a 4U high-density server, supports Intel® Xeon® Scalable Processor. Equipped with front-to-back airflow and hot-swap redundant fans to provide optimal thermal conditions.

This drive enclosure converts 1 x 5.25 drive bay to 2 x 2.5 SFF hot swap bays, supporting 2 NVMe PCIe SSDs. The drive trays are tool-less. No tools are needed for installation and removing of drives.

RSC-2ET3 is a T series 2U 12-bay SAS/SATA storage server chassis. With its tool-less 3.5" and 2.5" hard drive carriers, top covers and backplane, the RSC-2ET3 supports quick installation and easy maintenance. This tool-less design solution also features 3 x 80x38mm easy swap fans and SPGC pre-plated steel with minimal paint, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

RSC-2AT3 is a T series 2U 24-bay SAS/SATA storage server chassis. With its tool-less 2.5" hard drive/SSD carriers, top covers and backplane, the RSC-2AT3 supports quick installation and easy maintenance. This tool-less design solution also features 3 x 80x38mm easy swap fans and SPGC pre-plated steel with minimal paint, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

J2024-07-04X is an innovative 2U24 JBOD that integrates 2.5" SAS (24G/12G, dual) / SATA (6G, single) disk drive, Broadcom SAS4X-Series expander chip, and board-to-board connection design into a compact and stable system with exceeding productivity.

SB102-HK, a 1U all flash server solution, supports dual 4th Gen Intel® Xeon® Scalable Processors (codename  Sapphire Rapids), 32x DDR5 RDIMM, and 4x PCIe GEN5 extensions. SB102-HK has 12 x 2.5” (front) hot-swappable NVMe bays to provide highest storage density and optimized performance for the applications.

SB201-HK, a 2U all flash server solution, supports dual 4th Gen Intel® Xeon® Scalable Processors (codename Sapphire Rapids), 32x DDR5 RDIMM, and 4x PCIe GEN5 extensions. SB201-HK has 24 x 2.5” (front)NVMe and 2x2.5" SATA(rear)  hot-swappable bays to provide highest storage density and optimized performance for the applications.

HP202-KT is a 2U 4-Node server solution with 12x 3.5” SAS/SATA bays. It comes with four AIC Kratos MB supports dual Intel® Xeon® Scalable Processors (Sapphire Rapids) family. Up to 3x PCIe X16 add-on cards for Network/HBA/RAID… features expansion. It has the optimized design for Hyper-Converged applications. Flexible Deployment/scale out one node at a time and transferring legacy software into cloud service easily.

BTO Reference Model

J4024-03-03X, a 4U 24-Bay SAS 12G JBOD, housing single/dual expander (field upgradable) modules, four fans and redundant power supply in short-depth design provides full redundancy and high availability for critical, performance driven storage demand. The combination of LSI expander chip and AIC's own firmware is a guarantee of compatibility with most mainstream hard drives, HBAs and RAID controllers (SAS2/SAS3).

SB402-TU, a 4U high-density server, supports Intel® Xeon® Scalable Processor. Equipped with front-to-back airflow and hot-swap redundant fans to provide optimal thermal conditions.

The Capella server board offers the latest AMD EPYC™ SoC technology which can support the highest core count in an x86-architecture with EPYC™ 9000-series processor, more main memory capacity and bandwidth with greater efficiency and greatest I/O density.

Capella has I/O bandwidth that matches the capability of the CPU cores to move data to and from the network, spinning disks, NVMe storage, and graphics acceleration devices.

By offering the parallelism to speed high performance computing environments, machine learning and predictive analysis benefit from the capability to process more data in memory and to accelerate computation with more direct GPU connectivity.

J4024-05-04X is an innovative 4U24 JBOD that integrates 3.5" SAS (24G/12G, dual) / SATA (6G, single) disk drive, Broadcom SAS4X-Series expander chip, and board-to-board connection design into a compact and stable system with exceeding productivity.

RSC-1AT3 is a T-series 1U Trimode storage server chassis supports 8 x 2.5" tri-mode hot-swap bay and 2 x 2.5" SATA SAS hot-swap bay.

RSC-1DT3 is a T-series 1U SAS/SATA/NVMe storage server chassis supports external 4 x 12G 3.5" hot swap and internal 2 x 2.5" drive bays. This environmentally friendly solution features high-efficiency power supply, SGCC pre-plated steel, tool-less ball-bearing mounting rail, and easy-swap PWM fans, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

HA401-TU is a 4U 24x SAS 12Gbs bay system with provides high availability in an active-active configuration. It comes with two AIC Server Boards (one board per node), each supporting dual Intel® Xeon® Scalable family (ICE LAKE) processors. Both nodes process I/Os and provide simultaneous and balanced access to the logical devices, which increases overall cluster performance significantly. When failover occurs, the secondary node automatically takes over the devices, client connections, and all processes/services of the system. It provides protection from loss of revenue when access to data resources and critical business applications are disrupted. The HA401-TU eliminates SPOFs (single point of failures). It is optimized for mission-critical, enterprise-level storage applications.

J2012-04-04X is an innovative 2U12 JBOD that integrates 3.5" SAS (24G/12G, dual) / SATA (6G, single) disk drive, Broadcom SAS4X-Series expander chip, and board-to-board connection design into a compact and stable system with exceeding productivity.

RSC- 2KT3 is a T-series 2U 8-bay SAS/SATA or 8 bay NVMe storage server chassis. RSC-2KT3 structure form are based on quick installation, easy maintenance and cost competitive, with tool-less design 3.5” and 2.5” hard drive carriers and top cover. Fan are Easy swap design X3 with low-power consumption, SPGC pre-plated steel with minimal paint, offering a cost- effective solution ideally suited for a broad range of application. (Power supply is included. Motherboard is not included).

RSC-4BT3 is a T series 4U 36-bay SAS/SATA storage server chassis. With its tool-less 3.5" and 2.5" hard drive carriers, top covers and backplane, the RSC-4BT3 supports quick installation and easy maintenance. This tool-less design solution also features 6 x low-power consumption hot swap fans and SPGC pre-plated steel with minimal paint, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

RSC-4ET3 is a T series 4U 24-bay SAS/SATA storage server chassis. With its tool-less 3.5" and 2.5" hard drive carriers, top covers and backplane, the RSC-4ET3 supports quick installation and easy maintenance. This tool-less design solution also features 3 x hot swap fans designed to minimize rotational vibration and SPGC pre-plated steel with minimal paint, offering a cost-effective solution ideally suited for a broad range of applications.  (Power supply is included. Motherboard is not included.)

Provide an additional solution. Add 6x 2.5” (NVMe) passive + 2x 2.5” SATA  H/W on rear panel.

EB201-TU, flexible front I/O and rear I/O, supports Intel® Xeon® Scalable processors. 16 x DIMM slots supports DDR4. Short-depth design for space-critical applications.