SB202-LB
Features & Benefits
BTO Reference Model
SB202-LB, a 2U 12-bay storage server solution, supports dual Intel® Xeon® Processors E5-2600 v3 and v4 product family. The backplane is tool-less and is of 12Gb/s SAS. You can opt for the one with expander chip on board. There are 12 drive bays for 3.5” drives in the front and 2 for 2.5” in the rear. SB202-LB supports up to 6 PCIe 3.0 slots utilizing 64 lanes.
Key Features
• 2U 12-Bay storage server
• Supports two Intel® Xeon® Processors E5-2600 v3 and v4 product family
• With Intel® C612 Series Chipset to provide 5+ years product life cycle
• Onboard Baseboard Management Controller for system management and IPMI control
• Front-to-back airflow and hot swap redundant fans to provide optimal thermal conditions
• Two 10GbE RJ45 ports
| Dimensions (W x D x H) |
| • mm : 430 x 680 x 88.2 • inches : 17 x 26.8 x 3.5 |
| Motherboard |
| Code Name - Libra |
| Processor |
| Processor Support : • Two Intel® Xeon® Processors E5-2600 v3/v4 product family • Support CPU TDP up to 85W |
| QPI Speeds : 9.6 GT/s, 8 GT/s, 7.2 GT/s |
| Socket Type : Socket R3 (FCLGA2011-3) |
| Chipset |
| Intel® C612 Chipset |
| System Memory |
| • 16 DIMM slots across 8 memory channels (4 memory channels per CPU; 2DPC) - 512GB DDR4 2400/2133 RDIMM DRx4 - 128GB DDR4 2400/2133 RDIMM SRx4 - 1024GB DDR4 2400/2133 LRDIMM QRx4 - 2048GB DDR4 2400/2133 LRDIMM 3DS 8Rx4 |
| Front Panel |
| • System Power on/off • System ID • System reset • 1 x USB 3.0 Type A |
| LEDs |
| • Power status • System Alert • LAN activity • Drive activity • System ID |
| Drive Bays |
| • External : 12 x 3.5” hot swap Options - • External : 2 x 2.5” hot swap (rear) • Internal : 2 x 2.5” |
| Backplane |
| Options : • 1 x 12-port 12Gb SAS backplane with 28-PHY expander chip and 3 SFF-8643 connectors • 1 x 12-port 12Gb SAS backplane with 3 SFF-8643 connectors |
| Expansion Slots (PCIe 3.0) |
| • 2 x16 slots (LP) • 1 x16 slot (x8 mode w/ IOC SKU) (LP) • 3 x8 slots (LP) |
| System BIOS |
| BIOS Type : • Insyde UEFI BIOS • SPI (Serial Peripheral Interface) FLASH Interface |
| BIOS Features : • ACPI • PXE • WOL • AC loss recovery • IPMI 2.0 KCS interface • SMBIOS • Serial console redirection • BIOS Boot Specification • BIOS Recovery Mode • SRIOV • iSCSI • TPM • PCIe NTB |
| On-board Devices |
| SATA : Built-in SATA controller with RAID support on Intel® C612 Chipset • 8 x 7pin SATA connectors • 1 x M.2 with SATA/PCIe X4 support |
| IPMI : Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor • Baseboard Management Controller • Intelligent Platform Interface 2.0 (IPMI 2.0) • iKVM, Media Redirection, IPMI over LAN, Serial over LAN • SMASH Support |
| Network Controller : • Intel® Ethernet Controller X540-BT2 dual port 10GbE, 10GBASE-T, PCIe v2.1, x8 [Or Intel® Ethernet Controller I350-AM2, dual port GbE, PCIe v2.0 (co-lay with Intel® X540-BT2). MOQ required.] • Intel® Ethernet Controller I210-AT, single port GbE controller, PCIe v2.1, 2.5 GT/s, x1 • Intel® Ethernet Network Connection I217-LM, single port GbE, 1Gbps • Realtek® RTL8201EL single port 10/100 Mbps Ethernet PHYceiver for dedicated |
| Graphics : Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor • PCIe VGA/2D Controller • 1920x1200@60Hz 32bpp |
| Rear I/O |
| • 2 x 10GbE RJ45 (or factory option: 2 x GbE) • 2 x additional GbE RJ45: optional in PCIe bracket area • 1 x GbE RJ45 dedicated to BMC management • 2 x USB 3.0 Type A • 1 x external DB-15 VGA port • 1 x external DB-9 COM port |
| Power Supply |
| 550W 1+1 redundant power supply 80+ Platinum • AC INPUT : 100~240V,50/60Hz,7-3.5A 800W 1+1 redundant power supply 80+ Platinum (BTO) • AC INPUT : 100~240V,50/60Hz,10-5A |
| System Cooling |
| 3 x 80x38 hot swap fans |
| System Management |
| • IPMI 2.0 • KVM over IP • Media redirection • Temperature, fan, voltage, PSU sensor monitor • System temperature • System ID / System fail indicator • Remote power on/off/reset • SEL message alarm through mail • SNMP support • Intel NM |
| Environmental Specifications |
| • Storage temperature : -10ºC(14ºF) ~ 60ºC(140ºF) • Operating temperature : 0ºC(32ºF) ~ 35ºC(95ºF) • Storage operating humidity : 5%~95% non-condensing |
| Gross Weight (w/PSU & Rail) |
| • kgs : 26 • lbs :57.3 |
| Packaging Dimensions (W x D x H) |
| • mm : 605 x 920 x 322 • inches : 23.8 x 36.2 x 12.7 |
| Mounting |
| Standard : 28" tool-less slide rail |
* All specifications are subject to change without notice.
| SKU Information | Description |
| XP1-S202LB01 |
2U 12-Bay Storage Server,12G EOB BP, Acbel 2U 550W HRP platinum, 2* 7mm 2.5"" Hot swap OS, |
| XP1-S202LB02 | 2U 12-Bay Storage Server,12G EOB BP, Acbel 2U 800W HRP platinum, 2* 7mm 2.5" Hot swap OS LIBRA/INTEL GRANTLEY/12V-IN/DDR4 RDIMM *16/ INTEL X540 10GBE REAR/SAS3008 IOC/INTERNAL GBE* 2/EATX 2xCPU heatsink, 28"" slide rail, w/o bezel |
| FRU Information | |||
| Standard Parts List | Part Number | Qty | Description |
| Fan | FC-000000093 | 1 | 8038 Fan Module |
| EOB Backplane | BBPJHD20002A | 1 | 12-port 12Gb SAS backplane with 28-PHY expander chip and 3 SFF-8643 connectors (EOB Backplane) |
| Power Supply Housing | PH-000000012 | 1 | 550W Platinum Redundant Power Supply Housing |
| Power Supply Module | PM-000000016 | 1 | 550W Platinum Redundant Power Supply Module |
| Power Supply Housing | PH-000000046 | 1 | 800W Platinum Redundant Power Supply Housing |
| Power Supply Module | PM-000000084_A01 | 1 | 800W Platinum Redundant Power Supply Module |
| Slide rail | H5521T200005 | 1 | 28" Tool-less slide rail |
| Optional Parts List | Part Number | Qty | Description |
| Front Bezel | M06-00128-33 | 1 | Suitable for RSC-2AT & RSC-2ET/RSC-2ETS |