Features & Benefits

Legacy Product 

HA201-WP, a 2U High-availability, Cluster-in-a-Box, Storage Server Solution that leverages the SBB (Storage Bridge Bay) standard with the use of COTS components. The dual node configuration comes with two Intel® Server Boards (S2600WP), each node supports dual Intel® Xeon® Processor E5-2600/E5-2600 v2 series processors. The HA201-WP is an active-active solution, which features fully redundant, hot-swappable compute nodes, PCIe NTB or 10GbE connection between nodes for communication and fail-over, 24x 3.5” hot-swappable HDD bays and 5x PCIe Gen3 slots per node.


Key Features
• High-availability storage server optimized for mission-critical, enterprise-level storage applications
• Fully redundant, fault-tolerant system supporting hot swappable controller nodes and storage drives
• Two compute nodes, Active-Active configuration, each supporting two Intel® Xeon® Processors E5-2600 or E5-2600 v2 Product Family and up to 512GB of memory
• 10GbE, PCIe NTB or SAS link between nodes for communication and fail-over
• Built-in LSI SAS2x36 SAS expander per node
• Intel® Trusted Platform Module (TPM) header to support Intel® Trusted Execution Technology (TXT)


Dimensions (W x D x H) (with chassis ears)
• mm : 482.6 x 815 x 88
• inches : 19 x 32 x 3.5
Motherboard (per node)
Intel® Server Board S2600WP
Processor (per node)
Processor Support : Two Intel® Xeon® Processors E5-2600/E5-2600 v2 Product Family
QPI Speeds : 8 GT/s, 7.2 GT/s, 6.4 GT/s
Socket Type : Socket R (FCLGA2011)
Chipset (per node)
Intel® C602 Chipset
System Memory (per node)
16 DIMM slots across 8 DIMM memory channels
• Unbuffered or registered DDR3 with ECC DIMMs
• Memory DDR3 data transfer rates of 800/1066/1333/1600/1867 MT/s
• Load Reduced DDR3 DIMM
• DDR3 standard I/O voltage of 1.5V (all speeds) and DDR3 Low Voltage of 1.35V (1600MT/s or below)
Front Panel
Power on/off
A :
• Power (Secondary)
• Warning
B :
• Power (Primary)
• Warning
Drive Bays
24 x 2.5" hot swap drive bays
1 x 24-port 6Gb SAS dual-loop backplane
Expander Board
1 x 36-port 6Gbs SAS expander board with 3 SFF-8087 connectors
Expansion Slots (PCIe 3.0) (per node)
5 x8 (4 LP & 1 FHHL)
Internal I/O Connectors/Headers (per node)
• 1 x 2x5 pin connector providing front panel support for 2 x USB ports
• 1 x internal Type A USB2.0 port
• 1 x internal USB port to support low profile eUSB SSD
• 1 x DH-10 serial Port B connector
• 1 x 1x7 pin header for optional Intel® Local Control Panel support
Rear Panel (per node)
• 2 x RJ45
• 2 x USB 2.0 Type A Connector
• 1 x VGA
• 1x Mini SAS
Ethernet (per node)
Dual GbE, Intel® I350 Gigabit Ethernet Controller
Video Support (per node)
Integrated Matrox G200 2D Graphics Controller
Server Management (per node)
• Onboard Server Engines* LLC Pilot III* Controller
• Support for Intel® Remote Management Module 4 solutions
• Intel® Light-Guided Diagnostics on field replaceable units
• Support for Intel® System Management Software
Support for Intel® Intelligent Power Node Manager
(Need PMBus - compliant power supply)
BIOS Flash Winbond W25Q64BV
Power Supply
1200W 1+1 redundant power supply
System Cooling (per node)
2 x 6056 fans
Environmental Specifications
• Temperature : 0°C - 35°C
• Humidity : 5% - 95% non-condensing
Gross Weight (w/PSU & Rail)
• kgs : 41
• lbs : 90
Packaging Dimensions (W x D x H)
• mm : 590 x 1150 x 330
• inches : 23.2 x 45.3 x 13
Standard : 28" tool-less slide rail

* All specifications are subject to change without notice.

DatasheetHA201-WP Datasheet
Size : 1 MB
Date : 01/18/2016
Size : 58 KB
Date : 01/18/2016
Size : 56 KB
Date : 01/18/2016
Size : 83 KB
Date : 01/18/2016
Size : 142 KB
Date : 01/18/2016