| Motherboard |
| Motherboard |
PSG-M-AQDP5100-110 |
| Dimensions |
| W x D x H |
17" x 24" x 1.75" |
| Processor |
| Processor |
• Dual 771-pin LGA sockets
• Supports single or dual Intel® 64-bit Xeon® processors |
| CPU Type |
• Quad-Core Intel® Xeon® processor 5400/5300 series (Harpertown/Clovertown)
• Dual-Core Intel® Xeon® processor 5200/5100 series (Wolfdale/Woodcrest) |
| System Bus |
1066/1333 MHz |
| Front Panel |
|
Buttons |
• Power ON/OFF
• System reset
• System ID |
|
LEDs |
• Power
• Hard drive activity
• Network activity |
| Drive Bays |
| Drive Bays |
Two(2) x 3.5" hot-swap SATA hard drive trays +
One(1) x 2.5" HDD internal + 1 x slim optical drive |
| Expansion Slots |
| Expansion Slots |
• 1 x PCIe X8 (w/ X4 link, low-profile)
Plus option of one of the following riser card configurations to support full-height, full-length cards:
• 2 x PCIe X8
• 1 x PCIe X8 + 1 x PCI-X
• 2 x PCI-X
• 1 x PCIe X16 |
| System Memory |
| System Memory |
• Six (6) 240-pin DIMM sockets
• Support up to 48 GB 667/533 DDR2
Registered ECC SDRAM |
| System BIOS |
| BIOS Type |
AMI BIOS
SPI (Serial Peripheral Interface) FLASH Interface |
|
BIOS Features |
• ACPI 1.0/2.0/3.0
• PXE 2.0
• AC loss recovery
• IPMI KCS interface
• SMBIOS 2.0
• Serial console re-direction |
| On-Board Devices |
| Chipset |
• Intel® 5100 (San Clemente) chipset
• Intel® ICH9R |
| SATA |
• Built-in Intel® ICH9R SATA2 controller
• RAID 0, 1, 5, 10 (Windows)
• RAID 0, 1, 10 (Linux) |
|
IPMI |
Aspeed AST2050 BMC
• Intelligent Platform Management Interface 2.0 (IPMI 2.0)
• iKVM, Media Re-direction, IPMI over LAN, Serial over LAN
• SMASH support |
|
Network Controllers |
• Intel® 82571EB (Ophir) PCI Express dual-port GbE controller; MAC/PHY/SerDes
• Intel® 82575EB (Zoar) PCI Express dual-port GbE controller; MAC/PHY/SerDes/SGMII
• Intel® 82566DM (Nineveh) GLCI single-port GbE controller; PHY
(for heartbeat in dual-node system or management) |
|
Graphics |
Aspeed AST2050 graphics controller
• Up to 128 MB of memory
• 1600 x 1200 @ 60 Hz, 16bpp |
| Super I/O |
Winbond W83627DHG |
| SATA/SAS Backplane |
| SATA/SAS BP |
2 x single bay |
| Input/Output |
| Serial ATA |
4 x SATA connectors |
| LAN |
4 x RJ-45 external ports
1 x RJ-45 internal port |
| USB |
3 x USB external ports (2 x rear + 1 front) |
| VGA |
1 x VGA port
1 x VGA internal header |
|
Serial Port |
1 x Serial external port
1 x Serial internal header |
| Power Supply |
|
Power Supply |
450W power supply
• 1U redundant (1+1)
• 90-264VAC, 47-63 Hz |
| System Cooling |
|
System Cooling |
• 4 x 40mm x 56mm, 15.8K rpm
• 2 x 40mm x 28mm, 16.5K rpm |
| System Management |
| System Management |
• IPMI 2.0 compliance
• KVM over IP
• Media redirection
• CPU temperature(PCEI)
• System temperature
• FAN speed detection
• Smart FAN speed control
• System ID/System Fail indicator
• SMASH Support
• Remote Power ON/OFF/RESET |
| Operating Environment |
| Environmental Specifications |
• Operating Temperature: 0 ~ 40°C
• Operating Altitude Condition: 0 ~ 10K feet
• Storage Temperature: -20 ~ 60 °C
• System Relative Humidity: 5% to 95% (38°C) non-condensing |